Volume 208, 2018

In situ formation of the active sites in Pd–Au bimetallic nanocatalysts for CO oxidation: NAP (near ambient pressure) XPS and MS study

Abstract

Model bimetallic Pd–Au/HOPG catalysts have been investigated in the CO oxidation reaction using a combination of NAP XPS and MS techniques. The samples have shown catalytic activity at temperatures above 150 °C. The redistribution of Au and Pd on the surface depending on the reaction conditions has been demonstrated using NAP XPS. The Pd enrichment of the bimetallic particles’ surface under reaction gas mixture has been shown. Apparently, CO adsorption induces Pd segregation on the surface. Heating the sample under reaction conditions above 150 °C decomposes the Pd–CO state due to CO desorption and reaction and simultaneous Pd–Au alloy formation on the surface takes place. Cooling back down to RT results in reversible Pd segregation due to Pd–CO formation and the sample becomes inactive. It has been shown that in situ studies are necessary for investigation of the active sites in Pd–Au bimetallic systems.

Graphical abstract: In situ formation of the active sites in Pd–Au bimetallic nanocatalysts for CO oxidation: NAP (near ambient pressure) XPS and MS study

Associated articles

Article information

Article type
Paper
Submitted
19 дек. 2017
Accepted
24 јан. 2018
First published
24 јан. 2018

Faraday Discuss., 2018,208, 255-268

In situ formation of the active sites in Pd–Au bimetallic nanocatalysts for CO oxidation: NAP (near ambient pressure) XPS and MS study

A. V. Bukhtiyarov, I. P. Prosvirin, A. A. Saraev, A. Yu. Klyushin, A. Knop-Gericke and V. I. Bukhtiyarov, Faraday Discuss., 2018, 208, 255 DOI: 10.1039/C7FD00219J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements