Issue 2, 2023

Enhancing solar absorbance using a 2D graphene oxide/CuO composite film for efficient solar desalination

Abstract

Interfacial solar steam generation (ISSG) is a promising seawater desalination technique owing to the low cost, zero pollution and easy operation involved. In this work, we aimed to develop a novel 2D graphene oxide (GO)/CuO photothermal film via a facile ultrasonication method towards enhanced solar absorbance for highly efficient ISSG. The as-prepared GO/CuO film exhibited a sandwiched nanostructure, where the CuO nanoparticles were confined in the GO layers. This was beneficial to enlarge the spacing of the GO layers, leading to high light reflection in the GO/CuO film. Alternatively, the CuO nanoparticles could promote the incident light absorbance in the whole visible light range. Moreover, the water contact angle of the GO/CuO film was 57.4°, which is much lower than that of the pure GO film (74.8°), suggesting that a high-water transport rate can be expected. Consequently, the highest light absorption of the GO/CuO film was 83% in the entire sunlight range, whereas the corresponding value was 74% for the pure GO film. Under 1 kW m−2 irradiation, the highest evaporation rate by the GO/CuO film reached 1.71 kg m−2 h−1 with an efficiency of 99.2%, which remained at 1.60 kg m−2 h−1 after 20 cycles of desalination. Furthermore, the GO/CuO film was applied to treat organic pollutants, which achieved a high removal efficiency of more than 90%.

Graphical abstract: Enhancing solar absorbance using a 2D graphene oxide/CuO composite film for efficient solar desalination

Article information

Article type
Paper
Submitted
23 авг. 2022
Accepted
09 дек. 2022
First published
09 дек. 2022

Environ. Sci.: Water Res. Technol., 2023,9, 523-532

Enhancing solar absorbance using a 2D graphene oxide/CuO composite film for efficient solar desalination

C. Xu and H. Li, Environ. Sci.: Water Res. Technol., 2023, 9, 523 DOI: 10.1039/D2EW00656A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements