Issue 47, 2022

High-performance dual-mode self-calibrating optical thermometry for Er3+, Li+ co-doped oxides

Abstract

Temperature measurement based on thermally dependent emissions from intra-configurational 4f–4f transitions of rare earth ions has been developed as an efficient method for non-contact thermometry, but it remains challenging for high resolution temperature measurement due to the inherent limitation of the energy gap (200–2000 cm−1) between the thermally coupled energy levels (TCELs). In this work, a group of oxide phosphors, Y2O3:xEr3+, yLi+, prepared by a low-temperature combustion method (LCM) were developed for dual-mode optical thermometry by leveraging the temperature-responsive upconversion (UC) emission from Er3+ ions. We discover that the introduction of the dopant (Li+ ion) into Y2O3: Er3+ synthesized by the LCM can significantly regulate the original crystal configuration and its surface structure. Its transition to a monocrystalline state can solve the problem of high impurity defects and possible high dislocation density that cannot be overcome by a polycrystalline state, thus remarkably increasing the emission intensity of UC (about 28 times). In addition, the dual-mode optical thermometry based on thermally coupled energy levels (TCELs) and non-thermally coupled energy levels (NTCELs) was examined with respect to the different temperature dependence of the three characteristic emission peaks of the Er3+ ions (i.e., from excited levels of 2H11/2, 4S3/2 and 4F9/2). At temperatures from 123 to 443 K, the maximum relative sensitivities (SRmax) are 6.67% K−1 and 1.13% K−1 and the maximum absolute sensitivity (SAmax) reaches 0.42% K−1and 2.48% K−1, respectively. The excellent sensitivity at low temperatures indicates that our results not only provide an effective doping strategy for improving the crystal type character and surface structure of oxide phosphors, but also provide an effective guideline for the low temperature environmental applications of functional upconversion optical thermometers.

Graphical abstract: High-performance dual-mode self-calibrating optical thermometry for Er3+, Li+ co-doped oxides

Supplementary files

Article information

Article type
Paper
Submitted
09 окт. 2022
Accepted
03 ноем. 2022
First published
09 ноем. 2022

J. Mater. Chem. C, 2022,10, 17917-17924

High-performance dual-mode self-calibrating optical thermometry for Er3+, Li+ co-doped oxides

H. Jiang, H. Jia, Y. Zhang, X. Zhang, Z. Feng, Y. Yuan, Z. Chen, Y. Hu, F. Peng, X. Liu and J. Qiu, J. Mater. Chem. C, 2022, 10, 17917 DOI: 10.1039/D2TC04291F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements