Issue 30, 2020

Identifying the electrocatalytic active sites of a Ru-based catalyst with high Faraday efficiency in CO2-saturated media for an aqueous Zn–CO2 system

Abstract

Developing a cost-effective, scalable, and efficient electrocatalyst for the hydrogen evolution reaction (HER) is the heart of producing pure hydrogen in practical applications. In this work, a unique approach to allow ruthenium (Ru) nanoparticles on carboxyl-functionalized porous sphere carbon (CF-Ru@PSC) for an aqueous Zn–CO2 system is reported. The CF-Ru@PSC catalyst was produced by inducing additional junction sites between metallic Ru and the carbon substrate for enhanced HER properties under a CO2 saturated condition. The strongly bonded Ru–C caused electron transfer from the bottom side of the metallic Ru to the PSC substrate, leading to efficient hydrogen adsorption energy of the surface. The DFT calculations and XAFS investigation suggested that the reconstructed electronic configuration from the Ru–C linkage acted as an efficient active site for HER. The CF-Ru@PSC electrocatalyst presented a high turnover frequency of 2.70H2 s−1 at an overpotential of 0.20 V in the CO2-saturated condition and high Faraday efficiency (98.2%) over 1000 min in the aqueous Zn–CO2 system.

Graphical abstract: Identifying the electrocatalytic active sites of a Ru-based catalyst with high Faraday efficiency in CO2-saturated media for an aqueous Zn–CO2 system

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
17 мар. 2020
Accepted
13 мај 2020
First published
29 мај 2020

J. Mater. Chem. A, 2020,8, 14927-14934

Identifying the electrocatalytic active sites of a Ru-based catalyst with high Faraday efficiency in CO2-saturated media for an aqueous Zn–CO2 system

J. Kim, Y. Yang, A. Seong, H. Noh, C. Kim, S. Joo, A. Cho, L. Zhang, J. Zhou, J. Wang, J. W. Han, J. Mahmood, J. Baek and G. Kim, J. Mater. Chem. A, 2020, 8, 14927 DOI: 10.1039/D0TA03050C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements