Issue 47, 2020

Broadband Tamm plasmon-enhanced planar hot-electron photodetector

Abstract

Here, we propose a planar hot-electron photodetector based on broadband Tamm plasmon resonance using a TiN layer, n-type doped Si layer, and seven pairs of DBRs. Simulation results show high absorption (94.2%) with a full width at half maximum of 239.3 nm, which is 2.9 times that of the Au/DBR configuration. We predict that the photoresponsivity can reach 26.1 mA W−1 at 1140 nm. Since the planar nanofilms for TP resonance are facile to fabricate, this work promotes hot-electron applications in broadband photodetection and other broadband light-harvesting applications.

Graphical abstract: Broadband Tamm plasmon-enhanced planar hot-electron photodetector

Supplementary files

Article information

Article type
Communication
Submitted
31 авг. 2020
Accepted
13 окт. 2020
First published
14 окт. 2020

Nanoscale, 2020,12, 23945-23952

Broadband Tamm plasmon-enhanced planar hot-electron photodetector

J. Wang, Y. Zhu, W. Wang, Y. Li, R. Gao, P. Yu, H. Xu and Z. Wang, Nanoscale, 2020, 12, 23945 DOI: 10.1039/D0NR06294D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements