Issue 45, 2020

Broadband polarization-insensitive and wide-angle solar energy absorber based on tungsten ring-disc array

Abstract

Nowadays, solar energy is considered one of the most clean energy sources. In addition, the data from the literature tell us that its main radiation bandwidth is approximately 295–2500 nm. In this work, we proposed a novel kind of broadband solar energy absorber based on tungsten (W) to achieve broadband absorption of solar energy. A four-layer ring-disk structure (SiO2–SiO2–W) is employed in our design. A finite-difference time-domain (FDTD) simulation was used to ascertain the absorption performance of the absorber. The results demonstrate that a broadband solar energy absorption was realized, the bandwidth is of 1530 nm with an absorption efficiency of more than 90%, and an absorption efficiency of 97% was achieved in this region. The absorption spectra can be tuned through changing the structural and geometric parameters. Moreover, the absorber has excellent polarization independence and can be used under incident angles from 0° to 60°. The proposed solar energy absorber is simple to fabricate, and can be used for photothermal conversion, solar energy harvesting and utilization.

Graphical abstract: Broadband polarization-insensitive and wide-angle solar energy absorber based on tungsten ring-disc array

Article information

Article type
Paper
Submitted
13 јун. 2020
Accepted
29 окт. 2020
First published
31 окт. 2020

Nanoscale, 2020,12, 23077-23083

Broadband polarization-insensitive and wide-angle solar energy absorber based on tungsten ring-disc array

Z. Yi, J. Li, J. Lin, F. Qin, X. Chen, W. Yao, Z. Liu, S. Cheng, P. Wu and H. Li, Nanoscale, 2020, 12, 23077 DOI: 10.1039/D0NR04502K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements