Issue 18, 2019

Hybridizing anions towards fast diffusion kinetics for tri-ion batteries with significantly improved rate capability and cycling life

Abstract

Dual-ion batteries are promising candidates for next-generation energy storage devices due to their merits of low cost, environmental friendliness and easy recovery. However, intercalation/deintercalation of large anions usually causes slow ion diffusion kinetics and large volume variation in graphite cathodes leading to unsatisfactory rate capability and poor cycling stability. Herein, we report a new aluminum–graphite tri-ion (Li+/PF6/BF4) battery configuration (named as AGTIB) using an anion-hybridization strategy by combining PF6 with BF4 in the electrolyte. An optimized AGTIB is demonstrated to exhibit fast ion diffusion kinetics and substantially reduced volume changes in the graphite cathode during cycling. The AGTIB has a high rate performance with a 90.5 mA h g−1 capacity at 15C (92.5% retention compared to 2C) and good cycling stability for over 500 cycles at 5C with negligible capacity decay. The present finding suggests that the facile anion hybridization strategy shows promising application for exploring high-performance energy storage devices.

Graphical abstract: Hybridizing anions towards fast diffusion kinetics for tri-ion batteries with significantly improved rate capability and cycling life

Supplementary files

Article information

Article type
Communication
Submitted
22 мар. 2019
Accepted
04 апр. 2019
First published
08 апр. 2019

J. Mater. Chem. A, 2019,7, 10930-10935

Hybridizing anions towards fast diffusion kinetics for tri-ion batteries with significantly improved rate capability and cycling life

K. Shin, F. Zhang, X. Ou, N. Wu, C. Lee and Y. Tang, J. Mater. Chem. A, 2019, 7, 10930 DOI: 10.1039/C9TA03104A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements