Issue 11, 2019

Ultra-low formation of octahydrophenazine in the Beckmann rearrangement of cyclohexanone oxime using a microreactor

Abstract

Reaction solution circulation and control of heavy by-products are two crucial problems of the caprolactam industry with the consideration of energy conservation. To this end, the Beckmann rearrangement of cyclohexanone oxime, which was catalyzed by a mixed-acid catalyst containing trifluoroacetic acid (TFA) and oleum, was conducted in a microchemical system. The effects of experimental parameters on the heavy by-product, octahydrophenazine (OHP), were assessed, including the molar ratio of TFA to oleum (T/A ratio), molar ratio of oleum to oxime (A/O ratio), SO3 mass fraction, temperature, and TFA distribution between two fluids (D(TFA)). The content of OHP was decreased with the increase of the A/O ratio, T/A ratio, and SO3 mass fraction and a suitable D(TFA) and temperature within the range of experiments. Meanwhile, the adiabatic operation was found favorable and an ultra-low content (<1.0 ppm) of OHP was realized under the optimum conditions. Besides, potential reaction pathways of OHP formation were also proposed and discussed based on the experimental evidence. These results are therefore expected to contribute to the process design and optimization for the industrial production of CPL.

Graphical abstract: Ultra-low formation of octahydrophenazine in the Beckmann rearrangement of cyclohexanone oxime using a microreactor

Supplementary files

Article information

Article type
Paper
Submitted
18 јун. 2019
Accepted
25 јул. 2019
First published
26 јул. 2019

React. Chem. Eng., 2019,4, 1991-1999

Ultra-low formation of octahydrophenazine in the Beckmann rearrangement of cyclohexanone oxime using a microreactor

C. Du, Y. Hu, J. Zhang and G. Luo, React. Chem. Eng., 2019, 4, 1991 DOI: 10.1039/C9RE00246D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements