Issue 17, 2018

All-inorganic CsPbBr3 perovskite quantum dots as a photoluminescent probe for ultrasensitive Cu2+ detection

Abstract

Pollution triggered by highly toxic heavy metal ions has become a worldwide issue of concern, and has aroused increasing research interest, but it is still a challenge to carry out its trace detection in the organic phase using inorganic fluorescent colloidal nanocrystals (NCs). Herein, we report fully inorganic CsPbBr3 perovskite quantum dots (PQDs), which were synthesized via a hot-injection method, as a fluorescent probe for the selective detection of copper ions in hexane. The photoluminescence (PL) intensity of CsPbBr3 PQDs is significantly quenched within several seconds after the addition of Cu2+ due to effective electron transfer from the PQDs to the added Cu2+, which is experimentally verified via analyzing absorption spectra and PL decay lifetime. The sensor, in turn-off mode, has a detection range from 0 to 100 nM with a limit of detection (LOD) as low as 0.1 nM, indicating great potential for practical applications. This study paves the way for PQD-based fluorescent probes for heavy metal detection in the organic phase.

Graphical abstract: All-inorganic CsPbBr3 perovskite quantum dots as a photoluminescent probe for ultrasensitive Cu2+ detection

Supplementary files

Article information

Article type
Paper
Submitted
16 јан. 2018
Accepted
09 апр. 2018
First published
11 апр. 2018

J. Mater. Chem. C, 2018,6, 4793-4799

All-inorganic CsPbBr3 perovskite quantum dots as a photoluminescent probe for ultrasensitive Cu2+ detection

Y. Liu, X. Tang, T. Zhu, M. Deng, I. P. Ikechukwu, W. Huang, G. Yin, Y. Bai, D. Qu, X. Huang and F. Qiu, J. Mater. Chem. C, 2018, 6, 4793 DOI: 10.1039/C8TC00249E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements