Issue 19, 2017

Understanding particle formation in surfactant-free waterborne coatings prepared by emulsification of pre-formed polymers

Abstract

Concern for the environment has been driving major changes in the coatings industry. To reduce the amount of volatile organic compounds (VOC's) released to the atmosphere; new technology and deeper understanding should be developed to replace solvent-based coatings with water-based coatings. Most of these coatings contain latex particles prepared by emulsion polymerization, referred to as primary dispersions. Secondary dispersions are polymer nanoparticles in water normally prepared by nanoprecipitation in water of pre-formed polymer dissolved in a water-miscible organic solvent, which is later removed. In this work we design a new approach to secondary dispersions involving direct emulsification of a solid carboxylated polymer prepared by a solvent-free process. We carry out experiments to understand the emulsification process including polymer exchange among nanoparticles as the dispersions in water are annealed. We used a low molecular weight acid-functional styrene-acrylic copolymer (nominal Mn 5000 g mol−1, Đ = 3). With this polymer, we prepared aqueous polymer dispersion through partial neutralization with ammonia and vigorous stirring in hot water, in the absence of any organic solvent or surfactant. We labelled samples of the polymer with donor and acceptor dyes, which enabled us to study mixing of polymer molecules by fluorescence resonance energy transfer (FRET) during emulsification and upon annealing the dispersions. Our goal with labelling the polymer is to investigate the dispersion process as the partially neutralized polymer is stirred and heated, and to understand aspects of the colloidal stability of the dispersion at ambient and elevated temperatures. These types of polymers have the potential to serve as the basis for environmentally friendly tough and robust thermoset paints and coatings.

Graphical abstract: Understanding particle formation in surfactant-free waterborne coatings prepared by emulsification of pre-formed polymers

Supplementary files

Article information

Article type
Paper
Submitted
07 мар. 2017
Accepted
30 мар. 2017
First published
12 апр. 2017

Polym. Chem., 2017,8, 2931-2941

Understanding particle formation in surfactant-free waterborne coatings prepared by emulsification of pre-formed polymers

M. J. Gonzalez-Alvarez, J. Paternoga, K. Breul, H. Cho, M. Z. Roshandel, M. Soleimani and M. A. Winnik, Polym. Chem., 2017, 8, 2931 DOI: 10.1039/C7PY00387K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements