Issue 2, 2017

Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface

Abstract

Perovskite solar cells (PSCs) have experienced an outstanding advance in power conversion efficiency (PCE) by optimizing the perovskite layer morphology, composition, interfaces, and charge collection efficiency. To enhance PCE, here we developed a new method i.e., engineering a compositional gradient thinly at the rear interface between the perovskite and the hole transporting materials. We demonstrate that charge collection is improved and charge recombination is reduced by formation of an engineered passivating layer, which leads to a striking enhancement in open-circuit voltage (VOC). The passivation effect induced by constructing an additional FAPbBr3−xIx layer on top of the primary (FAPbI3)0.85(MAPbBr3)0.15 film was proven to function as an electron blocking layer within the perovskite film, resulting in a final PCE of 21.3%. Our results shed light on the importance of the interfacial engineering on the rear surface of perovskite layers and describe an innovative approach that will further boost the PSC efficiency.

Graphical abstract: Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface

Supplementary files

Article information

Article type
Paper
Submitted
30 окт. 2016
Accepted
03 јан. 2017
First published
03 јан. 2017

Energy Environ. Sci., 2017,10, 621-627

Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface

K. T. Cho, S. Paek, G. Grancini, C. Roldán-Carmona, P. Gao, Y. Lee and M. K. Nazeeruddin, Energy Environ. Sci., 2017, 10, 621 DOI: 10.1039/C6EE03182J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements