Issue 3, 2016

Structural engineering of gold thin films with channel cracks for ultrasensitive strain sensing

Abstract

This work demonstrates that engineering of the connection channels in gold thin films is an effective way to alter its resistivity for improved sensitivity in strain sensors. We investigated the formation of channel cracks and explored the corresponding piezoresistive behavior. The developed strain sensor possessed GFs as high as 200 (ε < 0.5%), 1000 (0.5% < ε < 0.7%), and even greater than 5000 (0.7% < ε < 1%), which are among the highest values reported thus far at such small deformation, and are promising in the applications of electronic skin, wearable sensors and health monitoring platforms.

Graphical abstract: Structural engineering of gold thin films with channel cracks for ultrasensitive strain sensing

Supplementary files

Article information

Article type
Communication
Submitted
29 јан. 2016
Accepted
26 фев. 2016
First published
26 фев. 2016

Mater. Horiz., 2016,3, 248-255

Structural engineering of gold thin films with channel cracks for ultrasensitive strain sensing

T. Yang, X. Li, X. Jiang, S. Lin, J. Lao, J. Shi, Z. Zhen, Z. Li and H. Zhu, Mater. Horiz., 2016, 3, 248 DOI: 10.1039/C6MH00027D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements