Issue 31, 2022

Modulating the photoelectrocatalytic conversion of CO2 to methanol and/or H2O to hydrogen at a phosphorene modified Ti/TiO2 electrode

Abstract

The effect of phosphorene as a co-catalyst for Ti/TiO2 nanotube electrodes on CO2 reduction to methanol, and water splitting was investigated. The electrode was prepared by using poly-dopamine as an anchoring agent to attach phosphorene, which was initially prepared by liquid exfoliation from black phosphorous. In this photoelectrocatalytic system, phosphorene acts as a p-type semiconductor with an energy band gap of −1.46 eV and strong photoactivation under visible light irradiation. Under optimized conditions, solar simulator irradiation and applied potential of −0.8 V in 0.1 mol L−1 Na2SO4 and pH 7 the CO2 reduction is preponderant in the process. The electrode system was found to also promote the production of hydrogen from water reduction when the photoelectrocatalytic process is conducted at the applied potential of −1.0 V in 0.1 mol L−1 Na2SO4 (pH 2). The results indicate that phosphorene can be a good modifier of Ti/TiO2, and the high charge mobility amplify its potential applicability to CO2 conversion.

Graphical abstract: Modulating the photoelectrocatalytic conversion of CO2 to methanol and/or H2O to hydrogen at a phosphorene modified Ti/TiO2 electrode

Article information

Article type
Paper
Submitted
02 мај 2022
Accepted
12 јул. 2022
First published
13 јул. 2022

J. Mater. Chem. C, 2022,10, 11276-11285

Modulating the photoelectrocatalytic conversion of CO2 to methanol and/or H2O to hydrogen at a phosphorene modified Ti/TiO2 electrode

F. A. Sayao, X. Ma, M. V. B. Zanoni and A. Lachgar, J. Mater. Chem. C, 2022, 10, 11276 DOI: 10.1039/D2TC01814D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements