Issue 6, 2022

Dopant-mediated surface charge imbalance for enhancing the performance of metal oxide chemiresistive gas sensors

Abstract

Chemically pristine and untailored metal oxide-based gas sensors usually suffer the brunt of poor sensitivity and selectivity. Doping with a suitable element is an efficient strategy to overcome the above challenges. However, to date, the choice of the dopant has been made primarily on empirical basis. This reflects the existence of lack of a general understanding as to what defines the suitability of a dopant. Based on surface electronic state analyses in different cases of dopant-enhanced gas sensing by tin oxide-based systems, we could identify a correlation between the role of the dopant oxidation states for generating surface charge imbalance and improvement in their respective sensing performances. The above studies were then extended to 54 different cases of dopant-induced sensing improvement in metal oxide-based systems and a similar correlation was observed. Based on the above observations, a generalized picture has been drawn that categorically delineates the role of surface charge imbalance in improved gas sensing performance. The above understanding is expected to make the choice of dopant more specific, paving the way for the development of highly sensitive gas sensors.

Graphical abstract: Dopant-mediated surface charge imbalance for enhancing the performance of metal oxide chemiresistive gas sensors

Supplementary files

Article information

Article type
Perspective
Submitted
25 окт. 2021
Accepted
01 јан. 2022
First published
04 јан. 2022

J. Mater. Chem. C, 2022,10, 1968-1976

Dopant-mediated surface charge imbalance for enhancing the performance of metal oxide chemiresistive gas sensors

N. Chakraborty and S. Mondal, J. Mater. Chem. C, 2022, 10, 1968 DOI: 10.1039/D1TC05144J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements