Issue 11, 2021

Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

Abstract

The 3D-printing technology offers an innovative approach to develop energy storage devices because of its ability to create facile and low cost customized electrodes for modern electronics. Among the recently explored 2D nanomaterials beyond graphene, molybdenum sulfide (MoSx) has been found as a promising material for electrochemical energy storage devices. In this study, a nanocarbon-based conductive filament was 3D-printed and then activated by solvent treatment, followed by electrodeposition of MoSx on the printed nanocarbon electrode's surface. The conductive nanocarbon fibers allow a coaxial deposition of a thin MoSx layer. The MoSx layer contributes to pseudocapacitive charge storage mechanisms to obtain higher capacitances. In a three-electrode test system with 1 M H2SO4 as electrolyte, the MoSx coated 3D-printed electrode (MoSx@3D-PE) electrode shows a capacitance of 27 mF cm−2 at the scan rate of 10 mV s−1, and a capacitance of 11.6 mF cm−2 at the current density of 0.13 mA cm−2. Extending to solid-state supercapacitor (SS-SC), the cells were fabricated using the MoSx@3D-PE with different designs and polyvinyl alcohol (PVA)/H2SO4 as gel electrolyte. An interdigital-shaped SS-SC provided a specific capacitance of 4.15 mF cm−2 at a current density of 0.05 mA cm−2. Moreover, it showed a stable cycle life where 10% capacitance loss was found after 10 000 cycles. Briefly, this study reports the integration of 3D-printing and room-temperature electrodeposition techniques allowing a simple way of fabricating customized free-standing 3D-electrodes for use in SC applications.

Graphical abstract: Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

Supplementary files

Article information

Article type
Paper
Submitted
08 септ. 2020
Accepted
03 мар. 2021
First published
16 мар. 2021

Nanoscale, 2021,13, 5744-5756

Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

K. Ghosh and M. Pumera, Nanoscale, 2021, 13, 5744 DOI: 10.1039/D0NR06479C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements