Issue 13, 2020

An effective strategy of constructing a multi-junction structure by integrating a heterojunction and a homojunction to promote the charge separation and transfer efficiency of WO3

Abstract

Adequate light absorption and effective charge separation and transfer are deemed to be the contributing factors to achieve high photoelectrochemical (PEC) water splitting on photoanodes. Herein, in this work, a Mo-WO3/Fe-WO3 homojunction was fabricated firstly by coating Fe doped WO3 (Fe-WO3) on Mo doped WO3 (Mo-WO3) via a two-step hydrothermal method, and then Bi2S3 nanoparticles (NPs) were further introduced onto the surface of Mo-WO3/Fe-WO3 to construct a multi-junction structure. In this Mo-WO3/Fe-WO3/Bi2S3 photoanode, the Bi2S3 NPs as the primary light absorber improve the light utilization efficiency. Moreover, the Fe-WO3/Bi2S3 heterojunction is formed due to their well-matched bands, which could facilitate charge separation and transfer; meanwhile, the internal built-in electric field at the interface of the Mo-WO3/Fe-WO3 homojunction would hinder the recombination of electron–hole pairs. Notably, the homojunction can further promote carrier transfer because of its unique property of eliminating the lattice mismatch. As expected, the Mo-WO3/Fe-WO3/Bi2S3 photoanode yields a significantly enhanced photocurrent of 2.55 mA cm−2 at 1.23 V vs. RHE, which is 8.23 times that of the WO3 photoanode. Thus, constructing a multi-junction structure with a ladder staggered alignment by integrating a homojunction and a heterojunction is believed to be an effective strategy to improve the PEC performance of WO3 photoanodes.

Graphical abstract: An effective strategy of constructing a multi-junction structure by integrating a heterojunction and a homojunction to promote the charge separation and transfer efficiency of WO3

Supplementary files

Article information

Article type
Paper
Submitted
11 јан. 2020
Accepted
08 мар. 2020
First published
10 мар. 2020

J. Mater. Chem. A, 2020,8, 6256-6267

An effective strategy of constructing a multi-junction structure by integrating a heterojunction and a homojunction to promote the charge separation and transfer efficiency of WO3

Y. Li, Z. Liu, J. Li, M. Ruan and Z. Guo, J. Mater. Chem. A, 2020, 8, 6256 DOI: 10.1039/D0TA00452A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements