Issue 46, 2018

Stabilization of all-solid-state Li–S batteries with a polymer–ceramic sandwich electrolyte by atomic layer deposition

Abstract

All-solid-state lithium–sulfur batteries (ASSLSBs) are promising candidates as the power source for future electric vehicles due to their high energy density and superior safety properties. However, one of the major challenges of state-of-the-art ASSLSBs is related to the high interfacial resistance resulting from the instability between the solid-state electrolyte (SSE) and electrodes and/or the side reactions between polysulfides and SSE. Herein, we propose and demonstrate the significant enhancement of the cycling stability of an ASSLSB through atomic layer deposition interfacial engineering on the polymer/oxide ceramic/polymer sandwich-structured SSE. The results show that as few as 10 cycles of ALD Al2O3 on the LATP can endow ASSLSBs with a discharge capacity of 823 mA h g−1 after 100 charge/discharge cycles, which is almost two times higher than that of the ASSLSB without an ALD coating and that of a Li–S battery with a liquid-based electrolyte. Such improvement is attributed not only to the blocking of the polysulfide shuttling effect via the use of a sandwich SSE but also the significant reduction of the side reaction between the polysulfide and oxide ceramic SSE, which introduces high interfacial resistance and degrades the electrochemical performance. The protection role and mechanism of the ALD layer is also confirmed and revealed by XRD, SEM and XPS measurements.

Graphical abstract: Stabilization of all-solid-state Li–S batteries with a polymer–ceramic sandwich electrolyte by atomic layer deposition

Supplementary files

Article information

Article type
Paper
Submitted
17 септ. 2018
Accepted
27 окт. 2018
First published
01 ноем. 2018

J. Mater. Chem. A, 2018,6, 23712-23719

Stabilization of all-solid-state Li–S batteries with a polymer–ceramic sandwich electrolyte by atomic layer deposition

J. Liang, Q. Sun, Y. Zhao, Y. Sun, C. Wang, W. Li, M. Li, D. Wang, X. Li, Y. Liu, K. Adair, R. Li, L. Zhang, R. Yang, S. Lu, H. Huang and X. Sun, J. Mater. Chem. A, 2018, 6, 23712 DOI: 10.1039/C8TA09069F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements