Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (193 citations).

From cells-on-a-chip to organs-on-a-chip: scaffolding materials for 3D cell culture in microfluidics
John A. Terrell, Curtis G. Jones, Giraso Keza Monia Kabandana and Chengpeng Chen
J. Mater. Chem. B, 2020, 8, 6667
DOI: 10.1039/D0TB00718H

Resolution of 3D bioprinting inside bulk gel and granular gel baths
Zheng-Tian Xie, Dong-Hee Kang and Michiya Matsusaki
Soft Matter, 2021, 17, 8769
DOI: 10.1039/D1SM00926E

Recent advancements in cardiovascular bioprinting and bioprinted cardiac constructs
Harshavardhan Budharaju, Anuradha Subramanian and Swaminathan Sethuraman
Biomater. Sci., 2021, 9, 1974
DOI: 10.1039/D0BM01428A

Inkjet assisted fabrication of planar biocompatible memristors
Georgii A. Illarionov, Denis S. Kolchanov, Oleg A. Kuchur, Mikhail V. Zhukov, Ekaterina Sergeeva, Vladimir V. Krishtop, Alexandr V. Vinogradov and Maxim I. Morozov
RSC Adv., 2019, 9, 35998
DOI: 10.1039/C9RA08114C

Biohybrid robotics with living cell actuation
Lingyu Sun, Yunru Yu, Zhuoyue Chen, Feika Bian, Fangfu Ye, Lingyun Sun and Yuanjin Zhao
Chem. Soc. Rev., 2020, 49, 4043
DOI: 10.1039/D0CS00120A

Go with the flow: modeling unique biological flows in engineeredin vitroplatforms
Elisa M. Wasson, Karen Dubbin and Monica L. Moya
Lab Chip, 2021, 21, 2095
DOI: 10.1039/D1LC00014D

Supramolecular peptidic dopants for inducing photoconductivity and mechanical tunability in digital light processable hydrogels
Harrison C. Jeong, Yuyao Kuang, Ze-Fan Yao and Herdeline Ann M. Ardona
Faraday Discuss., 2025, 260, 192
DOI: 10.1039/D5FD00031A

Study on the formation mechanism of viscoplastic line deposition for predicting filament width
Yifeng Yao, Qiang Gao, Kaicheng Yu, Lizi Qi, Zexue Lin, Jingfeng Xu, Yinze Li, Peng Zhang, Min Zhu and Lihua Lu
Materials & Design, 2025, 249, 113550
DOI: 10.1016/j.matdes.2024.113550

Thiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
Agnes Dobos, Jasper Van Hoorick, Wolfgang Steiger, Peter Gruber, Marica Markovic, Orestis G. Andriotis, Andreas Rohatschek, Peter Dubruel, Philipp J. Thurner, Sandra Van Vlierberghe, Stefan Baudis and Aleksandr Ovsianikov
Adv Healthcare Materials, 2020, 9
DOI: 10.1002/adhm.201900752

Synthesis of a stretchable polymer crosslinker for reinforced atelocollagen threads
Riku Kubota, Mana Naritomi and Ichiro Fujimoto
Reactive and Functional Polymers, 2023, 182, 105462
DOI: 10.1016/j.reactfunctpolym.2022.105462

Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Yuanhang Xu, Feiyang Zhang, Weijie Zhai, Shujie Cheng, Jinghua Li and Yi Wang
Polymers, 2022, 14, 566
DOI: 10.3390/polym14030566

Vascularizing the brain in vitro
Abdellah Aazmi, Hongzhao Zhou, Weikang Lv, Mengfei Yu, Xiaobin Xu, Huayong Yang, Yu Shrike Zhang and Liang Ma
iScience, 2022, 25, 104110
DOI: 10.1016/j.isci.2022.104110

Utilizing bioprinting to engineer spatially organized tissues from the bottom-up
Yichen Zhan, Wenbin Jiang, Zhirong Liu, Zhenxing Wang, Ke Guo and Jiaming Sun
Stem Cell Res Ther, 2024, 15
DOI: 10.1186/s13287-024-03712-5

Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Jiaxing Gong, Carl C. L. Schuurmans, Anne Metje van Genderen, Xia Cao, Wanlu Li, Feng Cheng, Jacqueline Jialu He, Arturo López, Valentin Huerta, Jennifer Manríquez, Ruiquan Li, Hongbin Li, Clément Delavaux, Shikha Sebastian, Pamela E. Capendale, Huiming Wang, Jingwei Xie, Mengfei Yu, Rosalinde Masereeuw, Tina Vermonden and Yu Shrike Zhang
Nat Commun, 2020, 11
DOI: 10.1038/s41467-020-14997-4

3D bioprinting of bicellular liver lobule-mimetic structures via microextrusion of cellulose nanocrystal-incorporated shear-thinning bioink
Yun Wu, Andrew Wenger, Hossein Golzar and Xiaowu Tang
Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-77146-3

Advances in 3D Bioprinting Technologies for Cardiovascular Intervention and Regeneration Therapeutics
Seon-Jin Kim and Jinah Jang
J Cardiovasc Interv, 2025, 4, 1
DOI: 10.54912/jci.2024.0027

3D bioprinting in tissue engineering: current state-of-the-art and challenges towards system standardization and clinical translation
Tarun Agarwal, Valentina Onesto, Dishary Banerjee, Shengbo Guo, Alessandro Polini, Caleb Vogt, Abhishek Viswanath, Timothy Esworthy, Haitao Cui, Aaron O’Donnell, Kiran Yellappa Vajanthri, Lorenzo Moroni, Ibrahim T Ozbolat, Angela Panoskaltsis-Mortari, Lijie Grace Zhang, Marco Costantini and Tapas Kumar Maiti
Biofabrication, 2025, 17, 042003
DOI: 10.1088/1758-5090/ade47a

Light focusing and additive manufacturing through highly scattering media using upconversion nanoparticles
Qianyi Zhang, Antoine Boniface, Virendra K. Parashar, Viola Sgarminato, Jorge Madrid-Wolff, Martin A. M. Gijs and Christophe Moser
gxjzz, 2025, 6, 248
DOI: 10.37188/lam.2025.021

Bioprinting for bone tissue engineering
Amedeo F. BONATTI, Irene CHIESA, Simone MICALIZZI, Giovanni VOZZI and Carmelo DE MARIA
Minerva Orthop, 2021, 72
DOI: 10.23736/S2784-8469.20.04032-1

Coaxial printing of double-layered and free-standing blood vessel analogues without ultraviolet illumination for high-volume vascularised tissue
Van Thuy Duong, Thi Thao Dang, Chang Ho Hwang, Sung Hoon Back and Kyo-in Koo
Biofabrication, 2020, 12, 045033
DOI: 10.1088/1758-5090/abafc6

Biofabrication Directions in Recapitulating the Immune System‐on‐a‐Chip
Robine Janssen, Laura Benito‐Zarza, Pim Cleijpool, Marta G. Valverde, Silvia M Mihăilă, Shanna Bastiaan‐Net, Johan Garssen, Linette E. M. Willemsen and Rosalinde Masereeuw
Adv Healthcare Materials, 2025, 14
DOI: 10.1002/adhm.202304569

3D biofabricated in vitro models as new approach methodologies for animal alternatives
Weijian Hua and Akhilesh K. Gaharwar
npj Biomed. Innov., 2026, 3
DOI: 10.1038/s44385-026-00073-x

Digitally Fabricated and Naturally Augmented In Vitro Tissues
Daniela F. Duarte Campos and Laura De Laporte
Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202001253

In vitro models of muscle spindles: From traditional methods to 3D bioprinting strategies
Yuannan Kang, Deepak M. Kalaskar and Darren J. Player
J Tissue Eng, 2025, 16
DOI: 10.1177/20417314251343388

Integration of electrospinning and 3D bioprinting for fibrous tissue manufacturing
Moein Zarei, Ayda Pourmostafa, Amirhossein Moghanian and Amir K. Miri
Bioprinting, 2026, 54, e00470
DOI: 10.1016/j.bprint.2026.e00470

Sound-induced morphogenesis of multicellular systems for rapid orchestration of vascular networks
Dalila Petta, Valentina Basoli, Daniele Pellicciotta, Riccardo Tognato, Jan Barcik, Chiara Arrigoni, Elena Della Bella, Angela Rita Armiento, Christian Candrian, R. Geoff Richards, Mauro Alini, Matteo Moretti, David Eglin and Tiziano Serra
Biofabrication, 2021, 13, 015004
DOI: 10.1088/1758-5090/abbb9c

Accessible dynamic micropatterns in monolayer cultures via modified desktop xurography
Raymond Tran, Corinne A Hoesli and Christopher Moraes
Biofabrication, 2021, 13, 025003
DOI: 10.1088/1758-5090/abce0b

Plug‐and‐Play Multimaterial Chaotic Printing/Bioprinting to Produce Radial and Axial Micropatterns in Hydrogel Filaments
Carlos Fernando Ceballos‐González, Edna Johana Bolívar‐Monsalve, Diego Alonso Quevedo‐Moreno, Carolina Chávez‐Madero, Silvana Velásquez‐Marín, Li Lu Lam‐Aguilar, Óscar Emmanuel Solís‐Pérez, Ariel Cantoral‐Sánchez, Mara Neher, Estefanía Yzar‐García, Yu Shrike Zhang, Carmine Gentile, Aldo R. Boccaccini, Mario Moisés Alvarez and Grissel Trujillo‐de Santiago
Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202202208

Pioneering the future of dentistry: AI-driven 3D bioprinting for next-generation clinical applications
Zihui Liang, Xiaohong Liao, Huiyi Zong, Xinyao Zeng, Hong Liu, Congcong Wu, Kavya Keremane, Bed Poudel, Jun Yin, Kai Wang and Jin Qian
Translational Dental Research, 2025, 1, 100005
DOI: 10.1016/j.tdr.2024.100005

In vitro high-content tissue models to address precision medicine challenges
Samson Afewerki, Thiago Domingues Stocco, André Diniz Rosa da Silva, André Sales Aguiar Furtado, Gustavo Fernandes de Sousa, Guillermo U. Ruiz-Esparza, Thomas J. Webster, Fernanda R. Marciano, Maria Strømme, Yu Shrike Zhang and Anderson Oliveira Lobo
Molecular Aspects of Medicine, 2023, 91, 101108
DOI: 10.1016/j.mam.2022.101108

Towards single-cell bioprinting: micropatterning tools for organ-on-chip development
Cécile Bosmans, Núria Ginés Rodriguez, Marcel Karperien, Jos Malda, Liliana Moreira Teixeira, Riccardo Levato and Jeroen Leijten
Trends in Biotechnology, 2024, 42, 739
DOI: 10.1016/j.tibtech.2023.11.014

Advances in biofabrication techniques towards functional bioprinted heterogeneous engineered tissues: A comprehensive review
William S. Harley, Chi Chung Li, Joseph Toombs, Cathal D. O'Connell, Hayden K. Taylor, Daniel E. Heath and David J. Collins
Bioprinting, 2021, 23, e00147
DOI: 10.1016/j.bprint.2021.e00147

Demineralized Dentin Matrix Particle-Based Bio-Ink for Patient-Specific Shaped 3D Dental Tissue Regeneration
Jonghyeuk Han, Wonwoo Jeong, Min-Kyeong Kim, Sang-Hyeon Nam, Eui-Kyun Park and Hyun-Wook Kang
Polymers, 2021, 13, 1294
DOI: 10.3390/polym13081294

Application of 3D Printing in Bone Grafts
Adam Brachet, Aleksandra Bełżek, Daria Furtak, Zuzanna Geworgjan, Dawid Tulej, Kinga Kulczycka, Robert Karpiński, Marcin Maciejewski and Jacek Baj
Cells, 2023, 12, 859
DOI: 10.3390/cells12060859

Bioink homogeneity control during 3D bioprinting of multicomponent micro/nanocomposite hydrogel for even tissue regeneration using novel twin screw extrusion system
Amitava Bhattacharyya, Gopinathan Janarthanan, Hao Nguyen Tran, Hyung Jun Ham, JeongHyun Yoon and Insup Noh
Chemical Engineering Journal, 2021, 415, 128971
DOI: 10.1016/j.cej.2021.128971

Biomechanical factors in three-dimensional tissue bioprinting
Liqun Ning, Carmen J. Gil, Boeun Hwang, Andrea S. Theus, Lilanni Perez, Martin L. Tomov, Holly Bauser-Heaton and Vahid Serpooshan
Applied Physics Reviews, 2020, 7
DOI: 10.1063/5.0023206

Dissolvable temporary barrier: a novel paradigm for flexible hydrogel patterning in organ-on-a-chip models
Ding Wang, Qinyu Li, Chenyang Zhou, Zhangjie Li, Kangyi Lu, Yijun Liu, Lian Xuan and Xiaolin Wang
Bio-des. Manuf., 2024, 7, 153
DOI: 10.1007/s42242-023-00267-x

The use of bacterial polysaccharides in bioprinting
Ronan R. McCarthy, Muhammad Wajid Ullah, Peter Booth, Eujin Pei and Guang Yang
Biotechnology Advances, 2019, 37, 107448
DOI: 10.1016/j.biotechadv.2019.107448

On-chip fabrication and in-flow 3D-printing of microgel constructs: from chip to scaffold materials in one integral process
Benjamin Reineke, Ilona Paulus, Sophia Löffelsend, Chien-Hsin Yu, Dmitrii Vinogradov, Anna Meyer, Jonas Hazur, Jonas Röder, Madita Vollmer, Gültekin Tamgüney, Stephan Hauschild, Aldo R Boccaccini, Jürgen Groll and Stephan Förster
Biofabrication, 2024, 16, 025038
DOI: 10.1088/1758-5090/ad3318

A critical review on the 3D bioprinting in large bone defects regeneration
Mostafa Shahrezaie, Ali Zamanian, Melika Sahranavard and Mohammad Hossein Shahrezaee
Bioprinting, 2024, 37, e00327
DOI: 10.1016/j.bprint.2023.e00327

Cold‐Responsive Nanocapsules Enable the Sole‐Cryoprotectant‐Trehalose Cryopreservation of β Cell–Laden Hydrogels for Diabetes Treatment
Yue Cheng, Yunru Yu, Yuntian Zhang, Gang Zhao and Yuanjin Zhao
Small, 2019, 15
DOI: 10.1002/smll.201904290

Co-axial hydrogel spinning for facile biofabrication of prostate cancer-like 3D models
Carlos F Guimarães, Shiqin Liu, Jie Wang, Emma Purcell, Tugba Ozedirne, Tanchen Ren, Merve Aslan, Qingqing Yin, Rui L Reis, Tanya Stoyanova and Utkan Demirci
Biofabrication, 2024, 16, 025017
DOI: 10.1088/1758-5090/ad2535

3D printing of customized key biomaterials genomics for bone regeneration
Boqing Zhang, Wenzhao Wang, Xingyu Gui, Ping Song, Haoyuan Lei, Zhengyong Li, Changchun Zhou, Yujiang Fan and Xingdong Zhang
Applied Materials Today, 2022, 26, 101346
DOI: 10.1016/j.apmt.2021.101346

3D micro-organisation printing of mammalian cells to generate biological tissues
Gavin D. M. Jeffries, Shijun Xu, Tatsiana Lobovkina, Vladimir Kirejev, Florian Tusseau, Christoffer Gyllensten, Avadhesh Kumar Singh, Paul Karila, Lydia Moll and Owe Orwar
Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-74191-w

Application Status of Sacrificial Biomaterials in 3D Bioprinting
Siyu Liu, Tianlin Wang, Shenglong Li and Xiaohong Wang
Polymers, 2022, 14, 2182
DOI: 10.3390/polym14112182

Ultrasound-assisted tissue engineering
Kai Melde, Athanasios G. Athanassiadis, Dimitris Missirlis, Minghui Shi, Senne Seneca and Peer Fischer
Nat Rev Bioeng, 2024, 2, 486
DOI: 10.1038/s44222-024-00166-5

Microbubble-based indirect measurement of cell loading in hydrogel bioinks during handling of 3D models
Swaprakash Yogeshwaran, Leila Donyaparastlivari, Ayda Pormoustafa, Vidhi Patel, Alexander Buffone, Rajarshi Chattaraj and Amir K. Miri
Journal of the Mechanical Behavior of Biomedical Materials, 2026, 175, 107286
DOI: 10.1016/j.jmbbm.2025.107286

A computational study of droplet-based bioprinting: Effects of viscoelasticity
M. Nooranidoost, D. Izbassarov, S. Tasoglu and M. Muradoglu
Physics of Fluids, 2019, 31
DOI: 10.1063/1.5108824

Cardiac Tissue Bioprinting: Integrating Structure and Functions Through Biomimetic Design, Bioinks, and Stimulation
Silvia Marino, Reem Alheijailan, Rita Alonaizan, Stefano Gabetti, Diana Massai and Maurizio Pesce
Gels, 2025, 11, 593
DOI: 10.3390/gels11080593

Hydrogel Extrusion Speed Measurements for the Optimization of Bioprinting Parameters
Stelian Arjoca, Florina Bojin, Monica Neagu, Andreea Păunescu, Adrian Neagu and Virgil Păunescu
Gels, 2024, 10, 103
DOI: 10.3390/gels10020103

3D extrusion bioprinting
Yu Shrike Zhang, Ghazaleh Haghiashtiani, Tania Hübscher, Daniel J. Kelly, Jia Min Lee, Matthias Lutolf, Michael C. McAlpine, Wai Yee Yeong, Marcy Zenobi-Wong and Jos Malda
Nat Rev Methods Primers, 2021, 1
DOI: 10.1038/s43586-021-00073-8

Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering
Mohamadmahdi Samandari, Jacob Quint, Alejandra Rodríguez‐delaRosa, Indranil Sinha, Olivier Pourquié and Ali Tamayol
Advanced Materials, 2022, 34
DOI: 10.1002/adma.202105883

Embedded 3D Printing of Ultrasound‐Compatible Arterial Phantoms with Biomimetic Elasticity
Yun Wu, Adrian J. Y. Chee, Hossein Golzar, Alfred C. H. Yu and Xiaowu (Shirley) Tang
Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202110153

Digital Light Processing Bioprinting Advances for Microtissue Models
Hossein Goodarzi Hosseinabadi, Elvan Dogan, Amir K. Miri and Leonid Ionov
ACS Biomater. Sci. Eng., 2022, 8, 1381
DOI: 10.1021/acsbiomaterials.1c01509

Additive manufacturing of peripheral nerve conduits – Fabrication methods, design considerations and clinical challenges
Allen Zennifer, Madhumithra Thangadurai, Dhakshinamoorthy Sundaramurthi and Swaminathan Sethuraman
SLAS Technology, 2023, 28, 102
DOI: 10.1016/j.slast.2023.03.006

A review of the structural and physical properties that govern cell interactions with structured biomaterials enabled by additive manufacturing
Ahmadreza Zaeri, Kai Cao, Fucheng Zhang, Ralf Zgeib and Robert C. Chang
Bioprinting, 2022, 26, e00201
DOI: 10.1016/j.bprint.2022.e00201

Recent trends in 3D bioprinting technology for skeletal muscle regeneration
Shabnam Sabetkish, Peter Currie and Laurence Meagher
Acta Biomaterialia, 2024, 181, 46
DOI: 10.1016/j.actbio.2024.04.038

Recent trends in embedded 3D bioprinting of vascularized tissue constructs
Won-Woo Cho, Wonbin Park and Dong-Woo Cho
Biofabrication, 2025, 17, 022002
DOI: 10.1088/1758-5090/adafdd

Three-dimensional bio-printed microtissues: precision medicine approach in primary liver cancer
Hani Keshavarz Alikhani, Homeyra Seydi, Kosar Nouri, Fatemeh Majidi, Olga Smirnova, Zahra Heydari, Daria Kuznetsova, Anastasia Shpichka, Elham Rismani, Peter Timashev and Massoud Vosough
Regenerative Medicine, 2025, 20, 773
DOI: 10.1080/17460751.2025.2595850

Manufacturing of animal products by the assembly of microfabricated tissues
Jinah Jang, Byeongwook Jo, Minghao Nie and Shoji Takeuchi
Essays in Biochemistry, 2021, 65, 611
DOI: 10.1042/EBC20200092

Controlling cellular organization in bioprinting through designed 3D microcompartmentalization
Mohamadmahdi Samandari, Fatemeh Alipanah, Keivan Majidzadeh-A, Mario M. Alvarez, Grissel Trujillo-de Santiago and Ali Tamayol
Applied Physics Reviews, 2021, 8
DOI: 10.1063/5.0040732

Hydrodynamic shear stress’ impact on mammalian cell properties and its applications in 3D bioprinting
Yani Zhang, Aidan O’Mahony, Yong He and Tracie Barber
Biofabrication, 2024, 16, 022003
DOI: 10.1088/1758-5090/ad22ee

Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications
Ying Li, Xueqin Zhang, Xin Zhang, Yuxuan Zhang and Dan Hou
Polymers, 2023, 15, 3940
DOI: 10.3390/polym15193940

Improving Bioprinted Volumetric Tumor Microenvironments In Vitro
Jun Li, Carolina Parra-Cantu, Zongyi Wang and Yu Shrike Zhang
Trends in Cancer, 2020, 6, 745
DOI: 10.1016/j.trecan.2020.06.002

Tissue-Specific Decellularized Extracellular Matrix Bioinks for Musculoskeletal Tissue Regeneration and Modeling Using 3D Bioprinting Technology
Wonbin Park, Ge Gao and Dong-Woo Cho
IJMS, 2021, 22, 7837
DOI: 10.3390/ijms22157837

Recent approaches towards bone tissue engineering
F. Raquel Maia, Ana R. Bastos, Joaquim M. Oliveira, Vitor M. Correlo and Rui L. Reis
Bone, 2022, 154, 116256
DOI: 10.1016/j.bone.2021.116256

3D Printing of Collagen Scaffold with Enhanced Resolution in a Citrate‐Modulated Gellan Gum Microgel Bath
Zheng‐Tian Xie, Jinfeng Zeng, Dong‐Hee Kang, Shigeyoshi Saito, Shigeru Miyagawa, Yoshiki Sawa and Michiya Matsusaki
Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202301090

Decellularized Extracellular Matrix-based Bioinks for Engineering Tissue- and Organ-specific Microenvironments
Byoung Soo Kim, Sanskrita Das, Jinah Jang and Dong-Woo Cho
Chem. Rev., 2020, 120, 10608
DOI: 10.1021/acs.chemrev.9b00808

Screen Printing to Create 3D Tissue Models
Narendra Pandala, Sydney Haywood, Michael A. LaScola, Adam Day, Joshua Leckron and Erin Lavik
ACS Appl. Bio Mater., 2020, 3, 8113
DOI: 10.1021/acsabm.0c01256

3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
Andrew McCormack, Christopher B. Highley, Nicholas R. Leslie and Ferry P.W. Melchels
Trends in Biotechnology, 2020, 38, 584
DOI: 10.1016/j.tibtech.2019.12.020

Type‐Independent 3D Writing and Nano‐Patterning of Confined Biopolymers
Un Yang, Byunghwa Kang, Moon‐Jung Yong, Dong‐Hwan Yang, Si‐Young Choi, Jung Ho Je and Seung Soo Oh
Advanced Science, 2023, 10
DOI: 10.1002/advs.202207403

Application of 3D Cell Culture Techniques in Nanotoxicology: How Far Are We?
Raheleh Shakeri, Seyedeh Zohreh Mirjalili, Ceyda Oksel Karakus and Maliheh Safavi
Stem Cell Rev and Rep, 2026, 22, 1273
DOI: 10.1007/s12015-025-11052-x

Candidate Bioinks for Extrusion 3D Bioprinting—A Systematic Review of the Literature
Sam P. Tarassoli, Zita M. Jessop, Thomas Jovic, Karl Hawkins and Iain S. Whitaker
Front. Bioeng. Biotechnol., 2021, 9
DOI: 10.3389/fbioe.2021.616753

Self‐Organization of Long‐Lasting Human Endothelial Capillary‐Like Networks Guided by DLP Bioprinting
Elsa Mazari‐Arrighi, Matthieu Lépine, Dmitry Ayollo, Lionel Faivre, Jérôme Larghero, François Chatelain and Alexandra Fuchs
Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202302830

Advances in 3D Bioprinting: Materials, Processes, and Emerging Applications
Subin Antony Jose, Antonia Evtimow and Pradeep L. Menezes
Micromachines, 2026, 17, 282
DOI: 10.3390/mi17030282

Hybrid bioprinting platforms: integrating microfluidic, AI, and additive manufacturing for functional tissue constructs
Md. Azhar, Rishabha Malviya, Balamurugan Balusamy, Sathvik Belagodu Sridhar, Javedh Shareef, Tarun Wadhwa and Aarthi Sivasankaran
Adv Compos Hybrid Mater, 2026, 9
DOI: 10.1007/s42114-026-01780-0

3D-printed constructs deliver bioactive cargos to expedite cartilage regeneration
Rong Jiao, Xia Lin, Jingchao Wang, Chunyan Zhu, Jiang Hu, Huali Gao and Kun Zhang
Journal of Pharmaceutical Analysis, 2024, 14, 100925
DOI: 10.1016/j.jpha.2023.12.015

Recent Advances in Regenerative Tissue Fabrication: Tools, Materials, and Microenvironment in Hierarchical Aspects
Monica Cahyaning Ratri, Albertus Ivan Brilian, Agustina Setiawati, Huong Thanh Nguyen, Veasna Soum and Kwanwoo Shin
Advanced NanoBiomed Research, 2021, 1
DOI: 10.1002/anbr.202000088

Harnessing Next‐Generation 3D Cancer Models to Elucidate Tumor‐Microbiome Crosstalk
Marina Green Buzhor, Giuseppe Longobardi, Or Kandli, Anne Krinsky, Opal Avramoff, Anshika Katyal, Koren Salomon, Adan Miari, Dana Venkert, Tania T. Barnatan, América García Alvarado, Shahar Greenberg and Ronit Satchi‐Fainaro
Adv Healthcare Materials, 2026, 15
DOI: 10.1002/adhm.202503198

Extrusion-Based Bioprinting of Multilayered Nanocellulose Constructs for Cell Cultivation Using In Situ Freezing and Preprint CaCl2 Cross-Linking
Anum Rasheed, Latifeh Azizi, Paula Turkki, Marika Janka, Vesa P. Hytönen and Sampo Tuukkanen
ACS Omega, 2021, 6, 569
DOI: 10.1021/acsomega.0c05036

Porous collagen scaffolds enable endothelial lumen formation in vitro under both static and dynamic growth conditions
Lena Rössler, Ramin Nasehi, Nadja Hansen, Sanja Aveic and Horst Fischer
J Biomed Mater Res, 2024, 112
DOI: 10.1002/jbm.b.35444

Sacrificial Biomaterials for Vascularized/Neuralized Organ 3D Printing
Siyu Liu, Tianlin Wang, Yukun Xu, Dabin Song, Zhiyuan Kong, Liang Wen and Xiaohong Wang
SSRN Journal, 2022
DOI: 10.2139/ssrn.4022934

Advances in tumor microenvironment: Applications and challenges of 3D bioprinting
Yingying Dong, Xue Zhou, Yunyi Ding, Yichen Luo and Hong Zhao
Biochemical and Biophysical Research Communications, 2024, 730, 150339
DOI: 10.1016/j.bbrc.2024.150339

Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Nanbo Liu, Xing Ye, Bin Yao, Mingyi Zhao, Peng Wu, Guihuan Liu, Donglin Zhuang, Haodong Jiang, Xiaowei Chen, Yinru He, Sha Huang and Ping Zhu
Bioactive Materials, 2021, 6, 1388
DOI: 10.1016/j.bioactmat.2020.10.021

3D Bioprinting for Next-Generation Personalized Medicine
Ethan Hau Yin Lam, Fengqing Yu, Sabrina Zhu and Zongjie Wang
IJMS, 2023, 24, 6357
DOI: 10.3390/ijms24076357

Computer vision-aided bioprinting for bone research
Changxi Liu, Liqiang Wang, Weijie Lu, Jia Liu, Chengliang Yang, Chunhai Fan, Qian Li and Yujin Tang
Bone Res, 2022, 10
DOI: 10.1038/s41413-022-00192-2

Engineering bioinks for 3D bioprinting
Guy Decante, João B Costa, Joana Silva-Correia, Maurice N Collins, Rui L Reis and J Miguel Oliveira
Biofabrication, 2021, 13, 032001
DOI: 10.1088/1758-5090/abec2c

Bioprinting of piezoresistive organohydrogel networks for advanced real-time mechanosensing in engineered tissue models
Miriam Filippi, Asia Badolato, Antonia Georgopoulou, Diana Mock, Jakob Schreiner, Mike Y. Michelis, Esther Amstad and Robert K. Katzschmann
Trends in Biotechnology, 2025, 43, 2509
DOI: 10.1016/j.tibtech.2025.05.026

Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Ana Clotilde Fonseca, Ferry P. W. Melchels, Miguel J. S. Ferreira, Samuel R. Moxon, Geoffrey Potjewyd, Tim R. Dargaville, Susan J. Kimber and Marco Domingos
Chem. Rev., 2020, 120, 11093
DOI: 10.1021/acs.chemrev.0c00342

Biofabrication of Heterogeneous, Multi‐Layered, and Human‐Scale Tissue Transplants Using Eluting Mold Casting
Enrico Tosoratti, Dominic Rütsche, Maryam Asadikorayem, Simone Ponta, Philipp Fisch, Killian Flégeau, Thomas Linder, Pierre Guillon and Marcy Zenobi‐Wong
Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202305651

Platforms for Personalized Polytherapeutics Discovery in COVID-19
Christopher Hopkins, Chidinma Onweni, Victoria Zambito, DeLisa Fairweather, Kathryn McCormick, Hideki Ebihara, Thomas Caulfield, Yu Shrike Zhang and W. David Freeman
Journal of Molecular Biology, 2021, 433, 166945
DOI: 10.1016/j.jmb.2021.166945

Fabrication techniques of biomimetic scaffolds in three‐dimensional cell culture: A review
Anjana K. Badekila, Sudarshan Kini and Amit K. Jaiswal
Journal Cellular Physiology, 2021, 236, 741
DOI: 10.1002/jcp.29935

Cancer Stem Cells in Tumor Modeling: Challenges and Future Directions
Elvan Dogan, Asli Kisim, Gizem Bati-Ayaz, Gregory J. Kubicek, Devrim Pesen-Okvur and Amir K. Miri
Advanced NanoBiomed Research, 2021, 1
DOI: 10.1002/anbr.202100017

3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review
Violeta Carvalho, Inês Gonçalves, Teresa Lage, Raquel O. Rodrigues, Graça Minas, Senhorinha F. C. F. Teixeira, Ana S. Moita, Takeshi Hori, Hirokazu Kaji and Rui A. Lima
Sensors, 2021, 21, 3304
DOI: 10.3390/s21093304

The Concept of the Optimal Bioscaffold: Parameters, Problems, and Their Resolution Through Additive Manufacturing
Petar Valchanov, Yordanka Yaneva, Stoyan Pavlov, Andreas Kontny and Tsanka Dikova
Biomedicines, 2025, 13, 2688
DOI: 10.3390/biomedicines13112688

Spatially Guided Construction of Multilayered Epidermal Models Recapturing Structural Hierarchy and Cell–Cell Junctions
Haiwei Zhai, Xiaowei Jin, Grayson Minnick, Jordan Rosenbohm, Mohammed Abdul Haleem Hafiz, Ruiguo Yang and Fanben Meng
Small Science, 2022, 2
DOI: 10.1002/smsc.202200051

Living cell‐laden hydrogels: Unleashing the future of responsive biohybrid systems
Xuejia Hu, Bing Lei, Sen‐Sen Li, Lu‐Jian Chen and Quan Li
Responsive Materials, 2023, 1
DOI: 10.1002/rpm.20230009

Ink Rheology Regulates Stability of Bioprinted Strands
Dhanvanth J. S. Talluri, Huan T. Nguyen, Reza Avazmohammadi and Amir K. Miri
Journal of Biomechanical Engineering, 2022, 144
DOI: 10.1115/1.4053404

Advances in 3D Bioprinting and Microfluidics for Organ-on-a-Chip Platforms
Natan Roberto de Barros, Samarah Vargas Harb, Cintia Delai da Silva Horinouchi, Larissa Bueno Tofani, Daniela Mayra dos Santos, Giovanna Blazutti Elias, Julia Carnelos Machado Velho, Ana Carolina de Aguiar, Monielle Sant’Ana and Ana Carolina Migliorini Figueira
Polymers, 2025, 17, 3078
DOI: 10.3390/polym17223078

A toolbox for microvalve-based bioprinting
I Deniz Derman, Medine Dogan Sarikaya, Yasar Ozer Yilmaz, Deepak Gupta, Syed Hasan Askari Rizvi, Taino Rivera and Ibrahim T Ozbolat
Biofabrication, 2026, 18, 025019
DOI: 10.1088/1758-5090/ae54d1

Maturation and Protection Effect of Retinal Tissue-Derived Bioink for 3D Cell Printing Technology
Jongmin Kim, Jeong Sik Kong, Hyeonji Kim, Wonil Han, Jae Yon Won and Dong-Woo Cho
Pharmaceutics, 2021, 13, 934
DOI: 10.3390/pharmaceutics13070934

Emerging Technologies in Multi‐Material Bioprinting
Hossein Ravanbakhsh, Vahid Karamzadeh, Guangyu Bao, Luc Mongeau, David Juncker and Yu Shrike Zhang
Advanced Materials, 2021, 33
DOI: 10.1002/adma.202104730

A Study of the Printability of Alginate-Based Bioinks by 3D Bioprinting for Articular Cartilage Tissue Engineering
Izar Gorroñogoitia, Uzuri Urtaza, Ana Zubiarrain-Laserna, Ana Alonso-Varona and Ane Miren Zaldua
Polymers, 2022, 14, 354
DOI: 10.3390/polym14020354

In vitro 3D skin culture and its sustainability in toxicology: a narrative review
Syafira Masri, Mh Busra Fauzi, Nor Fadilah Rajab, Wing-Hin Lee, Diana Atiqah Zainal Abidin and Ee Ling Siew
Artificial Cells, Nanomedicine, and Biotechnology, 2024, 52, 476
DOI: 10.1080/21691401.2024.2407617

Bioprinting the Osteochondral Interface: Advances, Challenges, and Future Directions
Hang Truong and Murat Guvendiren
Tissue Engineering Part A, 2026
DOI: 10.1177/19373341251410101

Biomimetic models of the glomerulus
Marta G. Valverde, Luis S. Mille, Kianti P. Figler, Ernesto Cervantes, Vanessa Y. Li, Joseph V. Bonventre, Rosalinde Masereeuw and Yu Shrike Zhang
Nat Rev Nephrol, 2022, 18, 241
DOI: 10.1038/s41581-021-00528-x

Programmable morphogenesis: integrating biophysical and genetic engineering tools to direct tissue formation
Nathaniel C Burmas and Quinton Smith
Biofabrication, 2026, 18, 022008
DOI: 10.1088/1758-5090/ae63f8

3D Printing metamaterials towards tissue engineering
Elvan Dogan, Anant Bhusal, Berivan Cecen and Amir K. Miri
Applied Materials Today, 2020, 20, 100752
DOI: 10.1016/j.apmt.2020.100752

Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Pooja Jain, Himanshu Kathuria and Nileshkumar Dubey
Biomaterials, 2022, 287, 121639
DOI: 10.1016/j.biomaterials.2022.121639

Oxygen-generating scaffolds: One step closer to the clinical translation of tissue engineered products
Robin Augustine, Mert Gezek, Nazli Seray Bostanci, Angelina Nguyen and Gulden Camci-Unal
Chemical Engineering Journal, 2023, 455, 140783
DOI: 10.1016/j.cej.2022.140783

Using chaotic advection for facile high-throughput fabrication of ordered multilayer micro- and nanostructures: continuous chaotic printing
Carolina Chávez-Madero, María Díaz de León-Derby, Mohamadmahdi Samandari, Carlos Fernando Ceballos-González, Edna Johana Bolívar-Monsalve, Christian Mendoza-Buenrostro, Sunshine Holmberg, Norma Alicia Garza-Flores, Mohammad Ali Almajhadi, Ivonne González-Gamboa, Juan Felipe Yee-de León, Sergio O. Martínez-Chapa, Ciro A. Rodríguez, Hemantha Kumar Wickramasinghe, Marc Madou, David Dean, Ali Khademhosseini, Yu Shrike Zhang, Mario Moisés Alvarez and Grissel Trujillo-de Santiago
Biofabrication, 2020, 12, 035023
DOI: 10.1088/1758-5090/ab84cc

Pump‐Less Platform Enables Long‐Term Recirculating Perfusion of 3D Printed Tubular Tissues
Feng Zhang, Dawn S. Y. Lin, Shravanthi Rajasekar, Alexander Sotra and Boyang Zhang
Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202300423

Continuous chaotic bioprinting of skeletal muscle-like constructs
Edna Johana Bolívar-Monsalve, Carlos Fernando Ceballos-González, Karen Ixchel Borrayo-Montaño, Diego Alonso Quevedo-Moreno, Juan Felipe Yee-de León, Ali Khademhosseini, Paul S. Weiss, Mario Moisés Alvarez and Grissel Trujillo-de Santiago
Bioprinting, 2021, 21, e00125
DOI: 10.1016/j.bprint.2020.e00125

A Three-Dimensional Bioprinted Copolymer Scaffold with Biocompatibility and Structural Integrity for Potential Tissue Regeneration Applications
Bou-Yue Peng, Keng-Liang Ou, Chung-Ming Liu, Shu-Fen Chu, Bai-Hung Huang, Yung-Chieh Cho, Takashi Saito, Chi-Hsun Tsai, Kuo-Sheng Hung and Wen-Chien Lan
Polymers, 2022, 14, 3415
DOI: 10.3390/polym14163415

Multimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering
Annan Chen, Wanying Wang, Zhengyi Mao, Yunhu He, Shiting Chen, Guo Liu, Jin Su, Pei Feng, Yusheng Shi, Chunze Yan and Jian Lu
Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307686

Vascular dysfunction in hemorrhagic viral fevers: opportunities for organotypic modeling
Evelyn Zarate-Sanchez, Steven C George, Monica L Moya and Claire Robertson
Biofabrication, 2024, 16, 032008
DOI: 10.1088/1758-5090/ad4c0b

Progenitor Cell Sources for 3D Bioprinting of Lymphatic Vessels and Potential Clinical Application
Inazio Arriola-Alvarez, Ibon Jaunarena, Ander Izeta and Héctor Lafuente
Tissue Engineering Part A, 2024, 30, 353
DOI: 10.1089/ten.tea.2023.0204

Extrusion bioprinting: meeting the promise of human tissue biofabrication?
Ian Holland
Prog. Biomed. Eng., 2025, 7, 023001
DOI: 10.1088/2516-1091/adb254

The Effect of Alginate/Hyaluronic Acid Proportion on Semi-Interpenetrating Hydrogel Properties for Articular Cartilage Tissue Engineering
Izar Gorroñogoitia, Sheila Olza, Ana Alonso-Varona and Ane Miren Zaldua
Polymers, 2025, 17, 528
DOI: 10.3390/polym17040528

Vascular tissues bioprinted with smooth muscle cell-only bioinks in support baths mimic features of native coronary arteries
Andre E Figueroa-Milla, William DeMaria, Derrick Wells, Oju Jeon, Eben Alsberg and Marsha W Rolle
Biofabrication, 2024, 16, 045033
DOI: 10.1088/1758-5090/ad6d8f

Fundamentals of light-cell–polymer interactions in photo-cross-linking based bioprinting
Daniel Nieto, Juan Antonio Marchal Corrales, Alberto Jorge de Mora and Lorenzo Moroni
APL Bioengineering, 2020, 4
DOI: 10.1063/5.0022693

Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Ahmed Fatimi, Oseweuba Valentine Okoro, Daria Podstawczyk, Julia Siminska-Stanny and Amin Shavandi
Gels, 2022, 8, 179
DOI: 10.3390/gels8030179

Use of Bombyx mori silk fibroin in tissue engineering: From cocoons to medical devices, challenges, and future perspectives
Alessio Bucciarelli and Antonella Motta
Biomaterials Advances, 2022, 139, 212982
DOI: 10.1016/j.bioadv.2022.212982

Biofabrication approaches and regulatory framework of metastatic tumor‐on‐a‐chip models for precision oncology
Daniel Nieto, Gema Jiménez, Lorenzo Moroni, Elena López‐Ruiz, Patricia Gálvez‐Martín and Juan Antonio Marchal
Medicinal Research Reviews, 2022, 42, 1978
DOI: 10.1002/med.21914

Cell encapsulation in gelatin bioink impairs 3D bioprinting resolution
Rachel Schwartz, Matthew Malpica, Gary L. Thompson and Amir K. Miri
Journal of the Mechanical Behavior of Biomedical Materials, 2020, 103, 103524
DOI: 10.1016/j.jmbbm.2019.103524

Optically driven microtools with an antibody‐immobilised surface for on‐site cell assembly
Shuntaro Mori, Takumi Ito, Hidekuni Takao, Fusao Shimokawa and Kyohei Terao
IET Nanobiotechnology, 2023, 17, 197
DOI: 10.1049/nbt2.12114

Traction of 3D and 4D Printing in the Healthcare Industry: From Drug Delivery and Analysis to Regenerative Medicine
Karim Osouli-Bostanabad, Tahereh Masalehdan, Robert M. I. Kapsa, Anita Quigley, Aikaterini Lalatsa, Kiara F. Bruggeman, Stephanie J. Franks, Richard J. Williams and David R. Nisbet
ACS Biomater. Sci. Eng., 2022, 8, 2764
DOI: 10.1021/acsbiomaterials.2c00094

Recent Developments in 3D Bio-Printing and Its Biomedical Applications
Humira Assad, Arvina Assad and Ashish Kumar
Pharmaceutics, 2023, 15, 255
DOI: 10.3390/pharmaceutics15010255

A FRESH SLATE for 3D bioprinting
Queeny Dasgupta and Lauren D. Black
Science, 2019, 365, 446
DOI: 10.1126/science.aay0478

Engineering (Bio)Materials through Shrinkage and Expansion
Mian Wang, Wanlu Li, Guosheng Tang, Carlos Ezio Garciamendez‐Mijares and Yu Shrike Zhang
Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202100380

Recapitulating the Cancer‐Immunity Cycle on a Chip
Yujin Lee, Jaehong Min, Solbin Kim, Wooju Park, Jihoon Ko and Noo Li Jeon
Adv Healthcare Materials, 2025, 14
DOI: 10.1002/adhm.202401927

Can 4D bioprinting revolutionize drug development?
Izeia Lukin, Saioa Musquiz, Itsasne Erezuma, Taleb H. Al-Tel, Nasim Golafshan, Alireza Dolatshahi-Pirouz and Gorka Orive
Expert Opinion on Drug Discovery, 2019, 14, 953
DOI: 10.1080/17460441.2019.1636781

Embedded 3D bioprinting – An emerging strategy to fabricate biomimetic & large vascularized tissue constructs
Harshavardhan Budharaju, Dhakshinamoorthy Sundaramurthi and Swaminathan Sethuraman
Bioactive Materials, 2024, 32, 356
DOI: 10.1016/j.bioactmat.2023.10.012

High-accuracy real-time controlled robotic-based bioprinting onto unknown and moving surfaces
Andrea Guerra, Shakiba Davani, Carlo Usai, Tomasz Jüngst, Christos Boutopoulos and Gabriele Maria Fortunato
Int J Adv Manuf Technol, 2025, 141, 1619
DOI: 10.1007/s00170-025-16810-2

Recent advances on cancer-on-chip models: Development of 3D tumors and tumor microenvironment
Nafiseh Moghimi, Seied Ali Hosseini, Mahla Poudineh and Mohammad Kohandel
Bioprinting, 2022, 28, e00238
DOI: 10.1016/j.bprint.2022.e00238

Next generation bioprinting with artificial intelligence in the healthcare industry
Babita Dhiman, Roopsandeep Bammidi, Mohit Kumar, Sanjay Mavinkere Rangappa and Suchart Siengchin
Next Bioengineering, 2026, 2, 100015
DOI: 10.1016/j.nxbio.2026.100015

3D Bioprinting using UNIversal Orthogonal Network (UNION) Bioinks
Sarah M. Hull, Christopher D. Lindsay, Lucia G. Brunel, Daniel J. Shiwarski, Joshua W. Tashman, Julien G. Roth, David Myung, Adam W. Feinberg and Sarah C. Heilshorn
Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202007983

Advances in microfabrication technologies in tissue engineering and regenerative medicine
Sara Nadine, Ada Chung, Sibel Emir Diltemiz, Brooke Yasuda, Charles Lee, Vahid Hosseini, Solmaz Karamikamkar, Natan Roberto de Barros, Kalpana Mandal, Shailesh Advani, Benjamin Behnam Zamanian, Marvin Mecwan, Yangzhi Zhu, Mohammad Mofidfar, Mohammad Reza Zare, João Mano, Mehmet Remzi Dokmeci, Farshid Alambeigi and Samad Ahadian
Artificial Organs, 2022, 46
DOI: 10.1111/aor.14232

Extrinsically Conductive Nanomaterials for Cardiac Tissue Engineering Applications
Arsalan Ul Haq, Felicia Carotenuto, Paolo Di Nardo, Roberto Francini, Paolo Prosposito, Francesca Pescosolido and Fabio De Matteis
Micromachines, 2021, 12, 914
DOI: 10.3390/mi12080914

Harnessing Bioprinting Technologies for Diabetic Wound Regeneration
Sanchit Dhankhar, Nitika Garg, Samrat Chauhan, Monika Saini and Thakur Gurjeet Singh
CPB, 2025, 26, 1482
DOI: 10.2174/0113892010306310240605050448

An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues
Soumitra Das and Bikramjit Basu
J Indian Inst Sci, 2019, 99, 405
DOI: 10.1007/s41745-019-00129-5

Sheet-based extrusion bioprinting: a new multi-material paradigm providing mid-extrusion micropatterning control for microvascular applications
Ryan Hooper, Caleb Cummings, Anna Beck, Javier Vazquez-Armendariz, Ciro Rodriguez and David Dean
Biofabrication, 2024, 16, 025032
DOI: 10.1088/1758-5090/ad30c8

Commercially available bioinks and state-of-the-art lab-made formulations for bone tissue engineering: A comprehensive review
Elena Alina Chiticaru and Mariana Ioniță
Materials Today Bio, 2024, 29, 101341
DOI: 10.1016/j.mtbio.2024.101341

Biofabrication of the osteochondral unit and its applications: Current and future directions for 3D bioprinting
Patricia Santos-Beato, Swati Midha, Andrew A Pitsillides, Aline Miller, Ryo Torii and Deepak M Kalaskar
J Tissue Eng, 2022, 13
DOI: 10.1177/20417314221133480

Development of a biomimetic arch-like 3D bioprinted construct for cartilage regeneration using gelatin methacryloyl and silk fibroin-gelatin bioinks
Juhi Chakraborty, Julia Fernández-Pérez, Kenny A van Kampen, Subhadeep Roy, Tim ten Brink, Carlos Mota, Sourabh Ghosh and Lorenzo Moroni
Biofabrication, 2023, 15, 035009
DOI: 10.1088/1758-5090/acc68f

3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering
Bin Qiu, Dongyang Wu, Mingcheng Xue, Lu Ou, Yanfei Zheng, Feng Xu, Hang Jin, Qiang Gao, Jian Zhuang, Jianzheng Cen, Bin Lin, Yu-Chuan Su, Songyue Chen and Daoheng Sun
Langmuir, 2024, 40, 4709
DOI: 10.1021/acs.langmuir.3c03358

Recent advances in Organ-on-a-Chip models: How precision engineering integrates cutting edge technologies in fabrication and characterization
Sorour Sadeghzade, Mohammad Hosseini Hooshiar, Hossein Akbari, Mahzad Haji Mahdi Tajer, Kiarash Kaki Sahneh, Saba Yousefpour Ziaei, Fatemeh Jalali and Elaheh Akouchakian
Applied Materials Today, 2024, 38, 102231
DOI: 10.1016/j.apmt.2024.102231

Advanced dECM-based bioprinting strategy for tissue regeneration
Xiangran Cui, Dedong Liu, Xin Lu, Wenjie Wang, Shangyu Du, Zhenpeng Wang, Ran Wei, Mufeng Li, Bo Chao and Yang Wang
Materials Today Advances, 2026, 29, 100733
DOI: 10.1016/j.mtadv.2026.100733

Freeform printing of thermoresponsive poly(2-cyclopropyl-oxazoline) as cytocompatible and on-demand dissolving template of hollow channel networks in cell-laden hydrogels
Vincent Mair, Ilona Paulus, Jürgen Groll and Matthias Ryma
Biofabrication, 2022, 14, 025019
DOI: 10.1088/1758-5090/ac57a7

Unconventional bioprinting modalities for advanced tissue biofabrication
I. Deniz Derman, Myoung Hwan Kim, Medine Dogan Sarikaya, Yasar Ozer Yilmaz, Elisabeth Grace Aliftiras, Valeriya Stepanyants, Taino Rivera and Ibrahim T. Ozbolat
Biomaterials, 2026, 326, 123704
DOI: 10.1016/j.biomaterials.2025.123704

Emerging biomaterials and technologies to control stem cell fate and patterning in engineered 3D tissues and organoids
Mojtaba Farahani, James Carthew, Sanchyan Bhowmik, Chloe Shard, Ana Nunez-Nescolarde, Guillermo A. Gomez, Victor J. Cadarso, Alexander N. Combes and Jessica E. Frith
Biointerphases, 2022, 17
DOI: 10.1116/6.0002034

Novel advances in strategies and applications of artificial articular cartilage
Yifei Chen, Chenyue Zhang, Shiyong Zhang, Hexu Qi, Donghui Zhang, Yifei Li and Jie Fang
Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.987999

Free-form co-axial bioprinting of a gelatin methacryloyl bio-ink by direct in situ photo-crosslinking during extrusion
Cathal D. O’Connell, Salamata Konate, Carmine Onofrillo, Robert Kapsa, Chris Baker, Serena Duchi, Timon Eekel, Zhilian Yue, Stephen Beirne, Grant Barnsley, Claudia Di Bella, Peter F. Choong and Gordon G. Wallace
Bioprinting, 2020, 19, e00087
DOI: 10.1016/j.bprint.2020.e00087

Key parameters and applications of extrusion-based bioprinting
Shuyu Tian, Hong Zhao and Nastassja Lewinski
Bioprinting, 2021, 23, e00156
DOI: 10.1016/j.bprint.2021.e00156

Multi‐Responsive Jammed Micro‐Gels Ink: Toward Control over the Resolution and the Stability of 3D Printed Scaffolds
Julien Es Sayed, Mohammad Khoonkari, Marta Oggioni, Patrick Perrin, Nicolas Sanson, Marleen Kamperman and Małgorzata Katarzyna Włodarczyk‐Biegun
Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202207816

Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Lucia G Brunel, Sarah M Hull and Sarah C Heilshorn
Biofabrication, 2022, 14, 032001
DOI: 10.1088/1758-5090/ac6bbe

Basement membrane properties and their recapitulation in organ-on-chip applications
Golestan Salimbeigi, Nihal E. Vrana, Amir M. Ghaemmaghami, Pinar Y. Huri and Garrett B. McGuinness
Materials Today Bio, 2022, 15, 100301
DOI: 10.1016/j.mtbio.2022.100301

Multicellular muscle-tendon bioprinting of mechanically optimized musculoskeletal bioactuators with enhanced force transmission
Miriam Filippi, Diana Mock, Judith Fuentes, Mike Y. Michelis, Aiste Balciunaite, Pablo Paniagua, Raoul Hopf, Adina Barteld, Selina Eng, Asia Badolato, Jess Snedeker, Maria Guix, Samuel Sanchez and Robert K. Katzschmann
Sci. Adv., 2025, 11
DOI: 10.1126/sciadv.adv2628

High‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip
Anna Fritschen, Nils Lindner, Sebastian Scholpp, Philipp Richthof, Jonas Dietz, Philipp Linke, Zeno Guttenberg and Andreas Blaeser
Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202304028

3D bioprinting approaches for musculoskeletal interfaces in tissue engineering
Fouad Al-Hakim Khalak, Julie Matias Decuyper, Kamal Al-Hakim Khalak, Sandra Ruiz Alonso, Laura Saenz-del-Burgo and Jose Luis Pedraz Muñoz
International Journal of Pharmaceutics, 2025, 682, 125939
DOI: 10.1016/j.ijpharm.2025.125939

Potentially commercializable nerve guidance conduits for peripheral nerve injury: Past, present, and future
Chundi Liu, Mouyuan Sun, Lining Lin, Yaxian Luo, Lianjie Peng, Jingyu Zhang, Tao Qiu, Zhichao Liu, Jun Yin and Mengfei Yu
Materials Today Bio, 2025, 31, 101503
DOI: 10.1016/j.mtbio.2025.101503

3D Bioprinting: Shaping the Future of Periodontal Tissue Regeneration and Disease Management
Jahnavi R Acharya, Santosh Kumar, Gaurav A Girdhar, Shirishkumar Patel, Nirav H Parekh, Hiren H Patadiya, Anjali Narsinhbhai Zinjala and Mainul Haque
Cureus, 2025
DOI: 10.7759/cureus.82432

An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications
Taufik Abdullah Mappa, Chung-Ming Liu, Chung-Chih Tseng, Muhammad Ruslin, Jui-Hung Cheng, Wen-Chien Lan, Bai-Hung Huang, Yung-Chieh Cho, Chia-Chien Hsieh, Hsin-Hui Kuo, Chen-Han Tsou and Yung-Kang Shen
Polymers, 2023, 15, 3223
DOI: 10.3390/polym15153223

Bioprinting for drug screening: A path toward reducing animal testing or redefining preclinical research?
Harshavardhan Budharaju, Rajendra K. Singh and Hae-Won Kim
Bioactive Materials, 2025, 51, 993
DOI: 10.1016/j.bioactmat.2025.07.006

The Design and Fabrication of Engineered Tubular Tissue Constructs Enabled by Electrohydrodynamic Fabrication Techniques: A Review
Fucheng Zhang, Kai Cao, Ahmadreza Zaeri, Ralf Zgeib and Robert C. Chang
Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202400095

1D, 2D, and 3D scaffolds promoting angiogenesis for enhanced wound healing
Yani Guo, Jun Huang, Yifen Fang, Hai Huang and Jun Wu
Chemical Engineering Journal, 2022, 437, 134690
DOI: 10.1016/j.cej.2022.134690

Biomimetic microsystems for cardiovascular studies
Shelby C. Inbody, Bridgett E. Sinquefield, Joshua P. Lewis and Renita E. Horton
American Journal of Physiology-Cell Physiology, 2021, 320, C850
DOI: 10.1152/ajpcell.00026.2020

Could 3D extrusion bioprinting serve to be a real alternative to organ transplantation in the future?
Kalyani Shinkar and Kawal Rhode
Annals of 3D Printed Medicine, 2022, 7, 100066
DOI: 10.1016/j.stlm.2022.100066

Radical scavenging gelatin methacrylamide based bioink formulation for three dimensional bioprinting of parenchymal liver construct
Roopesh R. Pai, Shilpa Ajit, Anupama Sekar J, Sarath S. Nair, P.R. Anil Kumar and Shiny Velayudhan
Bioprinting, 2022, 27, e00214
DOI: 10.1016/j.bprint.2022.e00214

Application progress of bio-manufacturing technology in kidney organoids
Runqi Mao, Junming Zhang, Haoxiang Qin, Yuanyuan Liu, Yuxin Xing and Wen Zeng
Biofabrication, 2025, 17, 022007
DOI: 10.1088/1758-5090/adb4a1

Microvalve Bioprinting of MSC-Chondrocyte Co-Cultures
Joseph Dudman, Ana Marina Ferreira, Piergiorgio Gentile, Xiao Wang and Kenneth Dalgarno
Cells, 2021, 10, 3329
DOI: 10.3390/cells10123329

Applications of Light-Based 3D Bioprinting and Photoactive Biomaterials for Tissue Engineering
Xueqin Zhang, Xin Zhang, Ying Li and Yuxuan Zhang
Materials, 2023, 16, 7461
DOI: 10.3390/ma16237461

High-Throughput 3D Bioprinted Organoids of Skin Cancer Utilized for Diagnosis and Personalized Therapy
Arvind Kumar Shukla, Sandhya Shukla, Sonali Pradeep Suryawanshi, Adarsha Mahendra Upadhyay, Navin Ray, Govindhan Thiruppathi, Sayan Deb Dutta and Raj Kumar Mongre
Current Oncology, 2025, 32, 653
DOI: 10.3390/curroncol32120653

Bioprinting dynamic hydrazone hydrogels via light-mediated crosslinking
Friederike Dehli, Forrest Hyde, Alexander Southan and Daniela F Duarte Campos
Biofabrication, 2026, 18, 025042
DOI: 10.1088/1758-5090/ae67a6

Manufacturing of self-standing multi-layered 3D-bioprinted alginate-hyaluronate constructs by controlling the cross-linking mechanisms for tissue engineering applications
Gopinathan Janarthanan, Jung Hyun Kim, Ingul Kim, Chibum Lee, Eun-Jae Chung and Insup Noh
Biofabrication, 2022, 14, 035013
DOI: 10.1088/1758-5090/ac6c4c

One‐Step Bioprinting of Multi‐Channel Hydrogel Filaments Using Chaotic Advection: Fabrication of Pre‐Vascularized Muscle‐Like Tissues
Edna Johana Bolívar‐Monsalve, Carlos Fernando Ceballos‐González, Carolina Chávez‐Madero, Brenda Guadalupe de la Cruz‐Rivas, Silvana Velásquez Marín, Shirley Mora‐Godínez, Luisa María Reyes‐Cortés, Ali Khademhosseini, Paul S. Weiss, Mohamadmahdi Samandari, Ali Tamayol, Mario Moisés Alvarez and Grissel Trujillo‐de Santiago
Adv Healthcare Materials, 2022, 11
DOI: 10.1002/adhm.202200448

Negative magnetophoresis guided unidirectional cell patterning on culture surface
Melike Cagan-Algan, Muge Anil-Inevi, Seren Kecili, Ece Inal, H. Cumhur Tekin, Gulistan Mese and Engin Ozcivici
Biomedical Engineering Advances, 2025, 9, 100169
DOI: 10.1016/j.bea.2025.100169

3D Printed and Bioprinted Membranes and Scaffolds for the Periodontal Tissue Regeneration: A Narrative Review
Irina-Georgeta Sufaru, Georgiana Macovei, Simona Stoleriu, Maria-Alexandra Martu, Ionut Luchian, Diana-Cristala Kappenberg-Nitescu and Sorina Mihaela Solomon
Membranes, 2022, 12, 902
DOI: 10.3390/membranes12090902

Responsive and self-healing structural color supramolecular hydrogel patch for diabetic wound treatment
Canwen Chen, Yu Wang, Han Zhang, Hui Zhang, Weiliang Dong, Weijian Sun and Yuanjin Zhao
Bioactive Materials, 2022, 15, 194
DOI: 10.1016/j.bioactmat.2021.11.037

Optimization of process parameters in 3D-nanomaterials printing for enhanced uniformity, quality, and dimensional precision using physics-guided artificial neural network
Anita Ghandehari, Jorge A. Tavares-Negrete, Jerome Rajendran, Qian Yi and Rahim Esfandyarpour
Discover Nano, 2024, 19
DOI: 10.1186/s11671-024-04155-w

3D bioprinting approaches for enhancing stem cell-based neural tissue regeneration
Cemile Kilic Bektas, Jeffrey Luo, Brian Conley, Kim-Phuong N. Le and Ki-Bum Lee
Acta Biomaterialia, 2025, 193, 20
DOI: 10.1016/j.actbio.2025.01.006

3D organotypic skin models recapitulate autoantibody-driven pemphigus pathomechanisms and targeted therapeutic response
Haiwei Zhai, Xiaowei Jin, Amir Ostadi Moghaddam, Matthew F. Spieker, Kristina Seiffert-Sinha, Animesh A. Sinha, Ruiguo Yang and Fanben Meng
Sci. Adv., 2026, 12
DOI: 10.1126/sciadv.adz5003

On-chip high-definition bioprinting of microvascular structures
Agnes Dobos, Franziska Gantner, Marica Markovic, Jasper Van Hoorick, Liesbeth Tytgat, Sandra Van Vlierberghe and Aleksandr Ovsianikov
Biofabrication, 2021, 13, 015016
DOI: 10.1088/1758-5090/abb063

Advances in 3D Bioprinting: Techniques, Applications, and Future Directions for Cardiac Tissue Engineering
Catherine A. Wu, Yuanjia Zhu and Y. Joseph Woo
Bioengineering, 2023, 10, 842
DOI: 10.3390/bioengineering10070842

Ink Formulation and Selection for Biological Applications of Two-Photon Polymerization
Smita M. Panda, Hossein Goodarzi Hosseinabadi, Hoda Fattel, Umakanta Tripathy and Amir K. Miri
ACS Appl. Opt. Mater., 2023, 1, 1501
DOI: 10.1021/acsaom.3c00165

Hydrogels for Skeletal Muscle Regeneration: Design, Fabrication, and Future Applications
Qinghua Meng, Miaomiao Xiao, Nan Zhang, Zhiyuan Yang, Hongshuai Leng, Xuequan Feng, Luxing Zhou and Chunyu Bao
ACS Polym. Au, 2026
DOI: 10.1021/acspolymersau.6c00055

Specialized Multimaterial Print Heads for 3D Hydrogel Printing: Tissue-Engineering Applications
Sanjairaj Vijayavenkataraman, Anna Garcia-Sabate and Jeremy CM Teo
IEEE Nanotechnology Mag., 2020, 14, 42
DOI: 10.1109/MNANO.2020.2966065

Multi-material digital light processing bioprinting of hydrogel-based microfluidic chips
Anant Bhusal, Elvan Dogan, Hai-Anh Nguyen, Olga Labutina, Daniel Nieto, Ali Khademhosseini and Amir K Miri
Biofabrication, 2022, 14, 014103
DOI: 10.1088/1758-5090/ac2d78

Extracellular matrix dynamics: tracking in biological systems and their implications
Michael Hu, Zihan Ling and Xi Ren
J Biol Eng, 2022, 16
DOI: 10.1186/s13036-022-00292-x

Light-based multi-material bioprinting of vascularised adipose tissue for breast fatty tissue engineering
Nina Hedemann, Alexander Thomas, Nils Tribian, Anna-Klara Amler, Sandra Krüger, David Holthaus, Patricia Huebbe, Inken Flörkemeier, Jörg Weimer, Nicolai Maass, Lutz Kloke, Dirk Bauerschlag and Marion Tina van Mackelenbergh
Biofabrication, 2025, 17, 025034
DOI: 10.1088/1758-5090/adb890

Robotic platform and path planning algorithm for in situ bioprinting
Gabriele Maria Fortunato, Gabriele Rossi, Amedeo Franco Bonatti, Aurora De Acutis, Christian Mendoza-Buenrostro, Giovanni Vozzi and Carmelo De Maria
Bioprinting, 2021, 22, e00139
DOI: 10.1016/j.bprint.2021.e00139

Predicting printability in suspended bioprinting using a rheology-informed hierarchical machine learning approach
Dageon Oh, Dasong Kim and Seung Yun Nam
Bioprinting, 2025, 50, e00427
DOI: 10.1016/j.bprint.2025.e00427

Recent Developments in Bio-Ink Formulations Using Marine-Derived Biomaterials for Three-Dimensional (3D) Bioprinting
Zied Khiari
Marine Drugs, 2024, 22, 134
DOI: 10.3390/md22030134