Issue 26, 2019

A hydrophobic polymer stabilized p-Cu2O nanocrystal photocathode for highly efficient solar water splitting

Abstract

For the first time, a compact hydrophobic layer composed of a macromolecular polymer was applied to inhibit the inactivation of cuprous oxide. In addition, 50 nm thick silver was sputtered on an FTO substrate as a reflective layer to enhance photon utilization efficiency, while n-TiO2 forms a semiconductor heterojunction to effectively separate photo-generated carriers. After depositing Pt as a hydrogen evolution catalyst, a photocurrent density of −5.5 mA cm−2 was finally obtained, and retained 98% photo-stability after 6 hours, and the IPCE summit reached 68.3% at 415 nm.

Graphical abstract: A hydrophobic polymer stabilized p-Cu2O nanocrystal photocathode for highly efficient solar water splitting

Supplementary files

Article information

Article type
Communication
Submitted
08 Maijs 2019
Accepted
12 Jūn. 2019
First published
12 Jūn. 2019

J. Mater. Chem. A, 2019,7, 15593-15598

A hydrophobic polymer stabilized p-Cu2O nanocrystal photocathode for highly efficient solar water splitting

Y. Li, X. Zhong, K. Luo and Z. Shao, J. Mater. Chem. A, 2019, 7, 15593 DOI: 10.1039/C9TA04822G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements