Issue 26, 2018

Parameter control for enhanced peak-to-valley current ratio in a MoS2/MoTe2 van der Waals heterostructure

Abstract

The IdsVds properties of a van der Waals cross-junction of few layered MoS2/MoTe2 were investigated, and the physical device parameters were altered in order to transform the conduction mechanism from thermionic emission to interband tunneling. The pristine heterostructure demonstrated rectification behavior of typical p–n junction diodes, because of the p-type and n-type nature of MoTe2 and MoS2, respectively. Lowering the contact resistance between the metal and channel materials, by changing the electrode metals from Au to Pd and Ti, alone did not give rise to carrier conduction through the hetero-interband tunneling between MoTe2 and MoS2. In addition to the reduction in contact resistance, the chemical doping of MoS2 using Benzyl Viologen (BV) achieves hetero-interband tunneling between MoTe2 and MoS2, which probably narrows the depletion layer by degenerating MoS2. The peak-to-valley ratio of the tunneling current of the BV-doped heterostructure of MoS2/MoTe2 is about 4.8, which is comparable to that of the commercially available Si tunneling diode.

Graphical abstract: Parameter control for enhanced peak-to-valley current ratio in a MoS2/MoTe2 van der Waals heterostructure

Supplementary files

Article information

Article type
Communication
Submitted
28 Febr. 2018
Accepted
10 Jūn. 2018
First published
11 Jūn. 2018

Nanoscale, 2018,10, 12322-12329

Parameter control for enhanced peak-to-valley current ratio in a MoS2/MoTe2 van der Waals heterostructure

N. T. Duong, S. Bang, S. M. Lee, D. X. Dang, D. H. Kuem, J. Lee, M. S. Jeong and S. C. Lim, Nanoscale, 2018, 10, 12322 DOI: 10.1039/C8NR01711E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements