Issue 10, 2018

A glassy carbon electrode modified by a triply-fused-like Co(ii) polyporphine and its ability for sulphite oxidation and detection

Abstract

This article presents a Co(II) polyporphine conductive polymer easily and rapidly obtained (less than 2 h 30 min) on the surface of a glassy carbon electrode from the transformation of an initial Mg(II) porphine solution in a four-step process (including electrochemical and chemical stages). The intimate molecular structure is argued on the basis of the electrochemical response of the modified electrode, as well as its surface characterization. Owing to its apparent stability in water over potential cycling and its high density in active Co(II) centers, the electrosynthesized film shows its ability to catalyze sulphite oxidation in aqueous solutions. The mechanism of this molecular catalysis was assessed through specifically designed voltammetric experiments. The performances of this system as an analytical method for sulphite determination in water were also evaluated (limit of detection and limit of quantification: 0.195 and 0.649 mmol L−1, respectively).

Graphical abstract: A glassy carbon electrode modified by a triply-fused-like Co(ii) polyporphine and its ability for sulphite oxidation and detection

Article information

Article type
Paper
Submitted
10 Nov. 2017
Accepted
19 Febr. 2018
First published
21 Febr. 2018

New J. Chem., 2018,42, 8180-8189

A glassy carbon electrode modified by a triply-fused-like Co(II) polyporphine and its ability for sulphite oxidation and detection

S. D. Rolle, C. H. Devillers, S. Fournier, O. Heintz, H. Gibault and D. Lucas, New J. Chem., 2018, 42, 8180 DOI: 10.1039/C7NJ04370H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements