Issue 31, 2018

Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy

Abstract

Transition metal carbodiimides MNCN (M = Co, Ni, Co0.9Ni0.1, Mn and Cu), were studied by simultaneous operando Raman and X-ray absorption spectroscopy (XAS) with focus on surface oxide detection during electrocatalytic water oxidation. As a proof of concept, easily modifiable screen-printed electrodes were used in this unified operando synchrotron setup for a trade-off between convenience of electrochemical anodization and spectroscopic data acquisition. Monitoring of chemical and structural transformations at the electrode surface during initial anodic electrode polarization shows stability for MNCN with M = Co, Ni, Co0.9Ni0.1 and Mn. While MnNCN is inactive, CoNCN emerges as the most active representative of the series. CuNCN displays pronounced side reactions and the formation of a surface copper oxide layer leading to lower current density attributed to water oxidation, as evident from an irreversible variation of the CuNCN redox behaviour in rotating ring-disc voltammetry. Furthermore, the accompanying structural and vibrational spectroscopy properties of the different MNCN compounds were explored with complementary ex situ analytical methods.

Graphical abstract: Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy

Supplementary files

Article information

Article type
Paper
Submitted
20 Apr. 2018
Accepted
26 Jūn. 2018
First published
06 Jūl. 2018

Dalton Trans., 2018,47, 10759-10766

Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy

R. J. Müller, J. Lan, K. Lienau, R. Moré, C. A. Triana, M. Iannuzzi and G. R. Patzke, Dalton Trans., 2018, 47, 10759 DOI: 10.1039/C8DT01587B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements