Issue 23, 2017

Computational design of cobalt-free mixed proton–electron conductors for solid oxide electrochemical cells

Abstract

Proton-conducting solid-oxide electrolyzer and fuel cells (PC-SOECs/FCs) represent viable, intermediate-temperature green technologies for H2 production and conversion. While PC ceramics have been extensively investigated as electrolytes for PC-SOECs/FCs, the development of corresponding single-phase electrode components has been hindered by difficulties in finding efficient mixed proton–electron conductors (MPECs), with also effective catalytic activity toward oxygen reduction and evolution reactions (ORR/OER). To address this challenge, we applied first-principles methods (PBE+U) to design new perovskite-oxide MPEC electrodes based on the known BaZrO3 PC ceramic. Our strategy has been to modify the parent material by substituting Zr with earth abundant transition metals, namely Mn and Fe. We found Zr : Mn and Zr : Fe ratios of 0.75 : 0.25 to be sufficient to obtain electronic structural features that can enable electric conductivity. We also investigated other relevant processes for MPEC-based electrodes: hydration, proton migration, and ORR/OER electrocatalysis. From calculations of key descriptors associated with these processes, we found that Zr substitution with Mn or Fe delivers in both cases promising PC-SOEC/FC electrodes. Moreover, our first-principles results highlight the specific qualities of Mn and Fe: the first provides better electronic features and electrocatalytic activities, whereas the latter allows for better hydration and proton migration. In perspective, our findings present clear indications for the experimental implementation and test of new low-cost materials for solid-oxide electrochemical cells.

Graphical abstract: Computational design of cobalt-free mixed proton–electron conductors for solid oxide electrochemical cells

Supplementary files

Article information

Article type
Paper
Submitted
11 Janv. 2017
Accepted
28 Marts 2017
First published
28 Marts 2017

J. Mater. Chem. A, 2017,5, 11825-11833

Computational design of cobalt-free mixed proton–electron conductors for solid oxide electrochemical cells

A. B. Muñoz-García, M. Tuccillo and M. Pavone, J. Mater. Chem. A, 2017, 5, 11825 DOI: 10.1039/C7TA00338B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements