Issue 5, 2017

Spatially-controllable and uniform photochemical transfer printing of block copolymer nanopatterns

Abstract

Transfer printing processes with resolution approaching 10 nm are not very common because pattern fidelity is often lost due to translational motion of the patterning molecules. To overcome this challenge, we describe here a photochemical transfer printing (PTP) process in which covalent bonds are formed between a nanopatterned master film formed by self-assembled poly(styrene)-block-poly(methyl methacrylate) (PS-b-PMMA) and solution-deposited conformal layer poly(styrenesulfonylazide-alt-maleic anhydride) in the solid state, where the pattern is fully stable. The monolayer of grafted PS-b-PMMA is then transferred to an initially blank replica film using a photopolymerizable liquid conformal layer possessing very low viscosity (hexanedioldiacrylate, 9 cP), which is known to promote dimensional uniformity in UV nanoimprint technology. The chemical nanopatterns transferred to the replica substrate is continuous and robust enough to successfully direct the self-assembly of new PS-b-PMMA films cast upon it after thermal annealing. The experiments in this work demonstrate patterning resolution down to 14 nm half-periodicity. The PTP process is mechanistically controlled by light and therefore can be spatially controlled by photomasks.

Graphical abstract: Spatially-controllable and uniform photochemical transfer printing of block copolymer nanopatterns

Supplementary files

Article information

Article type
Paper
Submitted
24 Sept. 2017
Accepted
24 Okt. 2017
First published
01 Nov. 2017

Mol. Syst. Des. Eng., 2017,2, 597-604

Spatially-controllable and uniform photochemical transfer printing of block copolymer nanopatterns

D. W. Janes, T. Inoue, N. D. Prisco, M. J. Maher, P. F. Nealey and C. J. Ellison, Mol. Syst. Des. Eng., 2017, 2, 597 DOI: 10.1039/C7ME00106A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements