Issue 4, 2017

High precision osmium stable isotope measurements by double spike MC-ICP-MS and N-TIMS

Abstract

Osmium stable isotopes provide a new, potentially powerful tool with which to investigate a diverse range of geological processes including planetary formation, ore-genesis and weathering. In this paper, we present a new technique for high precision measurement of osmium (Os) stable isotope ratios by both Multiple-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) and Negative ion Thermal Ionisation Mass Spectrometry (N-TIMS). We use a 188Os–190Os double spike, composed of 61% 188Os and 39% 190Os, to correct for mass dependent fractionation resulting from sample preparation and isotope measurement, with the ideal spike to sample ratio being 55 : 45. Isotope ratios are expressed as δ190Os which is the per mil deviation in the measured 190Os/188Os ratio relative to isotope reference material DROsS. Repeated analyses of double spiked DROsS for both MC-ICP-MS (n = 80 cycles) and N-TIMS (n = 280 cycles) show that an internal precision of 0.01–0.02‰ on δ190Os (2 se) can be attained, with a long-term reproducibility of 0.016‰ and 0.029‰ (2 sd; n = 91 and 83, respectively). The better reproducibility on MC-ICP-MS than on N-TIMS is, predominantly, due to measurement at higher beam intensities (11–18 V with consumption of ∼200 ng natural Os vs. 2–18 V with consumption of 2.3–45 ng natural Os, respectively). In addition to stable isotope compositions, our method allows for simultaneous measurement of 187Os/188Os and 186Os/188Os ratios with a precision of <40 ppm (2 se; 80 cycles for MC-ICP-MS and 280 cycles for N-TIMS) and an external reproducibility of 123–268 ppm and 234–361 ppm (2 sd; n = 91 for MC-ICP-MS and n = 83 for N-TIMS), respectively. We demonstrate that a similar precision and reproducibility can be obtained for other pure Os solutions as well as for geological materials. Furthermore, with a range of of analytical tests we evaluate and demonstrate the robustness of our method with regards to residual matrix effects and interference correction, signal intensity and on-peak zero on MC-ICP-MS, and the effect of oxygen corrections and isobaric interference on N-TIMS. Finally, we report the first Os stable isotope compositions for geological reference materials, including mantle peridotites and chromitites, and one ordinary chondrite.

Graphical abstract: High precision osmium stable isotope measurements by double spike MC-ICP-MS and N-TIMS

Supplementary files

Article information

Article type
Paper
Submitted
09 Nov. 2016
Accepted
03 Marts 2017
First published
06 Marts 2017

J. Anal. At. Spectrom., 2017,32, 749-765

High precision osmium stable isotope measurements by double spike MC-ICP-MS and N-TIMS

J. A. M. Nanne, M. Millet, K. W. Burton, C. W. Dale, G. M. Nowell and H. M. Williams, J. Anal. At. Spectrom., 2017, 32, 749 DOI: 10.1039/C6JA00406G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements