Issue 6, 2016

Method for the production of acrylonitrile–butadiene–styrene (ABS) and polycarbonate (PC)/ABS standards for direct Sb determination in plastics from e-waste using laser-induced breakdown spectroscopy

Abstract

This study presents a procedure for direct Sb determination in solid e-waste samples (polymers). Polymer standards (acrylonitrile–butadiene–styrene (ABS) and polycarbonate (PC)/ABS) were mixed with dichloromethane solution for homogenization and then dried, milled and sieved. The obtained powder was mixed with Sb2O3 and pressed in a thermopress. A calibration curve (Sb: 0 to 2.6% w/w) was prepared and analysed using LIBS (laser-induced breakdown spectroscopy) and more than 10 000 spectra were obtained. Carbon (247.856 nm) and Sb (259.805 nm) signals were recorded and normalized by their individual norm values. The best results were obtained when using C as the internal standard and the Sb concentration observed in the samples ranged from 0.15 to 0.68% (w/w). Standard addition tests were performed and the recoveries ranged from 63 to 83%.

Graphical abstract: Method for the production of acrylonitrile–butadiene–styrene (ABS) and polycarbonate (PC)/ABS standards for direct Sb determination in plastics from e-waste using laser-induced breakdown spectroscopy

Article information

Article type
Technical Note
Submitted
09 Febr. 2016
Accepted
06 Apr. 2016
First published
06 Apr. 2016

J. Anal. At. Spectrom., 2016,31, 1228-1233

Method for the production of acrylonitrile–butadiene–styrene (ABS) and polycarbonate (PC)/ABS standards for direct Sb determination in plastics from e-waste using laser-induced breakdown spectroscopy

F. W. B. Aquino, C. M. Paranhos and E. R. Pereira-Filho, J. Anal. At. Spectrom., 2016, 31, 1228 DOI: 10.1039/C6JA00038J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements