Issue 13, 2016

Measurement of total cholesterol using an enzyme sensor based on a printed hydrogen peroxide electrocatalyst

Abstract

Cholesterol is a major modifiable risk factor in cardiovascular disease and can be effectively managed by a combination of medication and monitoring. There continues to be a need for new point-of-care diagnostics to measure lipid panels, including total cholesterol. Enzyme assays based on the generation of hydrogen peroxide have been very effective in this regard. This work demonstrates the application of printed electrochemical sensors to the measurement of total cholesterol in serum. The assay uses the surfactant Triton X-100 to provide electrocatalytic enhancement of a silver paste screen-printed electrode to hydrogen peroxide, while also achieving effective solubilisation of total cholesterol from lipoprotein. The resulting biosensors employed 0.5% (v/v) Triton X-100 in PBS with 156 U mL−1 cholesterol esterase and 60 U mL−1 cholesterol oxidase. Measurement of total cholesterol in serum in the range of 0 to 10 mM had a sensitivity of 2.24 × 10−8 A mM−1, with coefficient of determination of 0.984, detection limit of at least 2 mM and average relative standard deviation of 10.8% (n = 3).

Graphical abstract: Measurement of total cholesterol using an enzyme sensor based on a printed hydrogen peroxide electrocatalyst

Article information

Article type
Paper
Submitted
16 Febr. 2016
Accepted
03 Marts 2016
First published
04 Marts 2016

Anal. Methods, 2016,8, 2743-2749

Measurement of total cholesterol using an enzyme sensor based on a printed hydrogen peroxide electrocatalyst

T. Ahmadraji and A. J. Killard, Anal. Methods, 2016, 8, 2743 DOI: 10.1039/C6AY00468G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements