Issue 3, 2009

The role of solvent in mechanochemical and sonochemical cocrystal formation: a solubility-based approach for predicting cocrystallisation outcome

Abstract

Mechanochemical liquid-assisted grinding (LAG) and sonochemical (SonicSlurry) techniques have been compared as methods to construct four model pharmaceutical cocrystals involving theophylline and caffeine as pharmaceutical ingredients and L-malic or L-tartaric acid as pharmaceutical cocrystal formers. For these model systems, the results are interpreted using the parameter η, the ratio of solvent volume to sample weight. Each if the four cocrystals was studied in four different solvents using LAG at η = 0.25 and 10 µL mg−1, as well as SonicSlurry experiments at η = 2, 6 and 12 µL mg−1. The formation of the cocrystal is observed in all standard LAG experiments when η = 0.25 µL mg−1. Cocrystal formation by neat grinding, i.e. with no liquid added, was observed only for the cocrystal of theophylline and L-malic acid. LAG experiments at very low η values (below 0.5 µL mg−1) revealed that the rate of cocrystal formation depended on the choice of the liquid and increases with η. SonicSlurry experiments performed at higher η values of 2, 6 and 12 µL mg−1 provided three different outcomes: the pure cocrystal, a mixture of the cocrystal with a cocrystal component, or a single cocrystal component. LAG experiments at η = 10 µL mg−1 produced results consistent with the SonicSlurry experiments at η = 12 µL mg−1. Measuring approximate solubilities of individual cocrystal components revealed that product formation is not dictated by the specific processing method but by saturation levels of reactants. An experimental approach based on approximate solubilities of cocrystal components has been developed to qualitatively predict the outcome of cocrystallization experiments at different η values. As a general guideline, cocrystal formation is expected under conditions in which all cocrystal components remain saturated.

Graphical abstract: The role of solvent in mechanochemical and sonochemical cocrystal formation: a solubility-based approach for predicting cocrystallisation outcome

Article information

Article type
Paper
Submitted
01 Sept. 2008
Accepted
07 Nov. 2008
First published
19 Dec. 2008

CrystEngComm, 2009,11, 418-426

The role of solvent in mechanochemical and sonochemical cocrystal formation: a solubility-based approach for predicting cocrystallisation outcome

T. Friščić, S. L. Childs, S. A. A. Rizvi and W. Jones, CrystEngComm, 2009, 11, 418 DOI: 10.1039/B815174A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements