Issue 6, 2024

Electrochemical-catalytic NH3 synthesis from H2O and N2 using an electrochemical cell with a Ru catalyst, Pd–Ag membrane cathode, and NaOH–KOH molten salt electrolyte at 250 °C

Abstract

Using sustainable energy-based electricity to synthesize NH3 from H2O and N2 to release O2 not only contributes to making chemical fertilizer production carbon neutral, but also holds promise for the use of NH3 as a fuel. NH3 synthesis from water and nitrogen was conducted at around 250 °C and below 1.0 MPa by combining a molten salt electrolyte of NaOH–KOH, a Pd alloy hydrogen-permeable membrane cathode, a Ni anode, and a Ru-based catalyst on the cathode backside. The rate and current efficiency for NH3 formation were obtained as 11 nmol s−1 cm−2 (38 μmol h−1 cm−2) and 25%, respectively, at 30 mA cm−2, 1.0 MPa, and 250 °C. It was confirmed that the remaining percentage from the 100% current efficiency for NH3 production was attributed to the current efficiency for H2 production. The cell voltage was as low as 1.47 V at 30 mA cm−2 and increased to 1.95 V at 100 mA cm−2. The potential of this electrochemical system is discussed.

Graphical abstract: Electrochemical-catalytic NH3 synthesis from H2O and N2 using an electrochemical cell with a Ru catalyst, Pd–Ag membrane cathode, and NaOH–KOH molten salt electrolyte at 250 °C

Supplementary files

Article information

Article type
Communication
Submitted
03 Apr. 2024
Accepted
19 Maijs 2024
First published
20 Maijs 2024
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2024,3, 1265-1270

Electrochemical-catalytic NH3 synthesis from H2O and N2 using an electrochemical cell with a Ru catalyst, Pd–Ag membrane cathode, and NaOH–KOH molten salt electrolyte at 250 °C

R. Sagara, R. Hayashi, A. Hirata, S. Nagaishi and J. Kubota, Energy Adv., 2024, 3, 1265 DOI: 10.1039/D4YA00218K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements