Issue 4, 2024

Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries

Abstract

Germanium (Ge) has a high theoretical specific capacity (1384 mA h gāˆ’1) and fast lithium-ion diffusivity, which makes it an attractive anode material for lithium-ion batteries (LIBs). However, large volume changes during lithiation can lead to poor capacity retention and rate capability. Here, electrophoretic deposition (EPD) is used as a facile strategy to prepare Ge nanoparticle carbon-nanotube (Ge/CNT) electrodes. The Ge and CNT mass ratio in the Ge/CNT nanocomposites can be controlled by varying the deposition time, voltage, and concentration of the Ge NP dispersion in the EPD process. The optimized Ge/CNT nanocomposite exhibited long-term cyclic stability, with a capacity of 819 mA h gāˆ’1 after 1000 cycles at C/5 and a reversible capacity of 686 mA h gāˆ’1 after 350 cycles (with a minuscule capacity loss of 0.07% per cycle) at 1C. The Ge/CNT nanocomposite electrodes delivered dramatically improved cycling stability compared to control Ge nanoparticles. This can be attributed to the synergistic effects of implanting Ge into a 3D interconnected CNT network which acts as a buffer layer to accommodate the volume expansion of Ge NPs during lithiation/delithiation, limiting cracking and/or crumbling, to retain the integrity of the Ge/CNT nanocomposite electrodes.

Graphical abstract: Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
11 Nov. 2023
Accepted
05 Febr. 2024
First published
13 Febr. 2024
This article is Open Access
Creative Commons BY-NC license

Nanoscale Horiz., 2024,9, 637-645

Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries

X. Pham, S. Abdul Ahad, N. N. Patil, H. Geaney, S. Singh and K. M. Ryan, Nanoscale Horiz., 2024, 9, 637 DOI: 10.1039/D3NH00501A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements