Issue 1, 2024

Estimating impacts of LCRR's fifth-liter sampling and find-and-fix requirements on large water systems

Abstract

The United States Environmental Protection Agency's (USEPA's) Lead and Copper Rule Revisions (LCRR) introduced many changes to the existing regulation. Two major changes are the change in sample methodology to fifth-liter (L5) sampling for homes with lead service lines and the find-and-fix (FaF) provision following any single home lead action level exceedance. This research proposes a method which estimates L5 lead levels from first-draw (L1) LCR data. Using L1 data along with paired L5–L1 difference data from other systems with similar L1 results, L5 data can be estimated accurately by bootstrapping. Using L1 data from two utilities (DC Water and Utility B) with known L5 data, this method was validated to accurately estimate L5 data. This method was then applied to a third utility (Philadelphia Water Department, PWD) with LCR data without paired L5 results to estimate what it can expect from this sample methodology. This same method was then applied to PWD to estimate the impact that FaF would have on the system by identifying how quickly new, permanent Water Quality Parameter (WQP) sites would have to be added. Under all simulations, PWD eventually would reach the maximum number of required WQP sites.

Graphical abstract: Estimating impacts of LCRR's fifth-liter sampling and find-and-fix requirements on large water systems

Supplementary files

Article information

Article type
Paper
Submitted
24 Aug. 2023
Accepted
02 Nov. 2023
First published
14 Nov. 2023
This article is Open Access
Creative Commons BY license

Environ. Sci.: Water Res. Technol., 2024,10, 241-249

Estimating impacts of LCRR's fifth-liter sampling and find-and-fix requirements on large water systems

T. C. Bradley, S. V. Masters, T. A. Bartrand and C. M. Sales, Environ. Sci.: Water Res. Technol., 2024, 10, 241 DOI: 10.1039/D3EW00631J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements