Issue 10, 2023

A study of bandgap-graded CZTGSe kesterite thin films for solar cell applications

Abstract

Cu2ZnSn(S,Se)4 kesterite materials are a sustainable and harmless alternative to conventional Cu(In,Ga)Se2 (CIGS) and CdTe absorbers for thin-film photovoltaics but are still lacking efficiency. This study presents the realization of bandgap grading in Cu2Zn(Sn1−xGex)Se4 (CZTGSe) kesterite thin films via the incorporation of Ge to partly substitute Sn, and their mutual segregation along the absorber profile. Bandgap values at the front and rear interfaces are, respectively, estimated to be around 1.10 eV and 1.38 eV, based on the Ge–Sn ratio. The kesterite deposition relies on a sequential process involving evaporating metallic precursors then annealing in Se vapour with an optimized temperature profile to favour crystallization and growth of micron-size grains. Further work is needed to solve the problem of the limited open-circuit voltage (Voc) and fill factor of in-house devices. However, the Ge-alloying method proposed in this work to obtain a continuous increase of the kesterite absorber bandgap towards its bottom surface could be applied to possibly enhance the performance of other kesterite solar cells.

Graphical abstract: A study of bandgap-graded CZTGSe kesterite thin films for solar cell applications

Supplementary files

Article information

Article type
Paper
Submitted
28 Jūl. 2023
Accepted
09 Aug. 2023
First published
10 Aug. 2023
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2023,2, 1626-1633

A study of bandgap-graded CZTGSe kesterite thin films for solar cell applications

R. Scaffidi, G. Brammertz, Y. Wang, A. U. Zaman, K. Sasikumar, J. de Wild, D. Flandre and B. Vermang, Energy Adv., 2023, 2, 1626 DOI: 10.1039/D3YA00359K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements