Issue 27, 2023

Anisotropic X-ray detection performance of melt-grown CsPbBr3 single crystals

Abstract

All-inorganic perovskite CsPbBr3 has been regarded as a new semiconductor radiation material with great potential due to its excellent carrier transport performance and thermal stability. However, it remains challenging to optimize the size and quality of CsPbBr3 single crystals for commercial applications. Here, the [100], [010], and [001] orientations of bulk CsPbBr3 single crystals were examined, and their anisotropic X-ray detection performance was investigated. The regular positive and negative charge distributions at the outer (010) surface and the connection of [PbBr6]4− octahedrons with the [010] orientation contribute to decreased defect densities and enhanced carrier transportation of the (010) facet. Additionally, the wafer with the [010] orientation exhibited the weakest ion migration among the three orientations due to the largest active energy (143.77 meV) and ion diffusion barrier energy (0.361 eV), which is advantageous for enhancing the X-ray response. Moreover, the (010) CsPbBr3 single crystal detector, which was fabricated with EGaIn and Au electrons, demonstrated the maximum sensitivity of 34 449 μC Gyair−1 cm−2 under a high bias voltage of −400 V and the lowest detection limit of 52.6 nGyair s−1 compared with the other two devices. This work highlights the anisotropic engineering of large-size single crystals for boosting perovskite radiation performance and provides valuable advice for the oriented growth of large-size crystals and films.

Graphical abstract: Anisotropic X-ray detection performance of melt-grown CsPbBr3 single crystals

Supplementary files

Article information

Article type
Paper
Submitted
28 Marts 2023
Accepted
12 Jūn. 2023
First published
13 Jūn. 2023

J. Mater. Chem. C, 2023,11, 9153-9160

Anisotropic X-ray detection performance of melt-grown CsPbBr3 single crystals

Y. Hua, X. Sun, X. Li, F. Cui, Z. Yue, J. Liu, H. Liu, G. Zhang and X. Tao, J. Mater. Chem. C, 2023, 11, 9153 DOI: 10.1039/D3TC01085F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements