Issue 8, 2023

Band-engineered dual-band visible and short-wave infrared photodetector with metal chalcogenide colloidal quantum dots

Abstract

Dual-band photodetectors have attracted significant attention because of their potential in optical communication, biochemical detection, and environmental monitoring. Colloidal quantum dots (CQDs) are promising materials for dual-band photodetectors because of their size-tunable bandgaps with wide spectral tunability and easy solution processability. Here, we propose a dual-band visible (VIS) and short-wave infrared (SWIR) detector based on metal chalcogenide CQDs (HgTe and CdTe CQDs). An n-type ZnO layer between the CdTe and HgTe layers is introduced as a hole-blocking layer to prevent hole injection from the different sensing layers, enabling the detector to switch between the VIS and SWIR modes by changing the polarity and magnitude of the bias voltage. The device exhibits an excellent performance with high responsivities of 0.5 and 1.1 A W−1 for the two bands that peak at 700 and 2100 nm, respectively. The detectivity of the device can reach 1.1 × 1011 Jones at +3 V (VIS) and 4.5 × 1011 Jones at −2 V (SWIR). In addition, VIS/SWIR dual-band imaging is realized, which provides more comprehensive object information than single-band detectors.

Graphical abstract: Band-engineered dual-band visible and short-wave infrared photodetector with metal chalcogenide colloidal quantum dots

Supplementary files

Article information

Article type
Paper
Submitted
06 Janv. 2023
Accepted
01 Febr. 2023
First published
02 Febr. 2023

J. Mater. Chem. C, 2023,11, 2842-2850

Band-engineered dual-band visible and short-wave infrared photodetector with metal chalcogenide colloidal quantum dots

P. Zhao, T. Qin, G. Mu, S. Zhang, Y. Luo, M. Chen and X. Tang, J. Mater. Chem. C, 2023, 11, 2842 DOI: 10.1039/D3TC00066D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements