Issue 12, 2023

Oligo(ethylene glycol)-incorporated hole transporting polymers for efficient and stable inverted perovskite solar cells

Abstract

Triarylamine (TAA)-based conjugated polymers have been extensively used as hole-transporting layers (HTLs) for inverted perovskite solar cells (PSCs), but their hydrophobic nature often causes insufficient wetting of the perovskite precursor solution on the HTL. This feature not only results in the deposition of a nonuniform perovskite layer on the HTL, but also generates detrimental defects at the interface, limiting the performance and stability of the PSCs. In this study, we develop a series of poly(triarylamine) (PTAA)-based hole transporting materials (HTMs) (MEG-PTAA, DEG-PTAA, and TEG-PTAA) with hydrophilic oligo(ethylene glycol) (OEG) side chains of different lengths to realize efficient and stable inverted PSCs. Incorporating prolonged OEG side chains progressively increases the wettability of the HTLs by perovskite precursor solution, enabling the deposition of a uniform perovskite layer. Moreover, additional oxygen atoms in the longer OEG side chain reinforce the passivation effects of the HTLs on interfacial Pb-based defects, effectively suppressing trap-assisted recombination of charge carriers. Among the series, the DEG-PTAA-based HTL demonstrates the most efficient and stable inverted PSCs, achieving a maximum power conversion efficiency (PCEmax) of 22.26%. Importantly, the DEG-PTAA-based PSC, which retains 80% of its initial PCE after 970 h under 1 sun illumination, is significantly more stable than the reference PTAA-based PSC, which retains only 57% of its initial PCE after the same period.

Graphical abstract: Oligo(ethylene glycol)-incorporated hole transporting polymers for efficient and stable inverted perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
04 Febr. 2023
Accepted
02 Marts 2023
First published
03 Marts 2023

J. Mater. Chem. A, 2023,11, 6615-6624

Oligo(ethylene glycol)-incorporated hole transporting polymers for efficient and stable inverted perovskite solar cells

C. Lim, Y. Kim, S. Lee, H. H. Park, N. J. Jeon and B. J. Kim, J. Mater. Chem. A, 2023, 11, 6615 DOI: 10.1039/D3TA00633F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements