Issue 6, 2023

Industrial lignins as efficient biosorbents for Cr(vi) water remediation: transforming a waste into an added value material

Abstract

Cr(VI) represents a worldwide issue due to its carcinogenicity and toxicity, and its removal from water/waste-water is of great relevance for the protection of human health and the environment. We here present an investigation of the adsorption and reduction properties towards Cr(VI) of two different kinds of industrial lignins: a kraft softwood lignin (HMW) and a hardwood lignin (EH) obtained by an enzymatic process. Moreover, we prepared and characterized an acetylated and a phosphorylated lignin starting from HMW, along with a lignin@magnetite hybrid material. The influence of various experimental parameters on the adsorption process, such as pH, contact time, quantity of lignin, Cr(VI) concentration and ionic strength, was evaluated. The best performances can be obtained at acidic pH (pH = 2). With an initial Cr(VI) concentration of 20 mg L−1 and a contact time of 24 hours, a quantitative Cr(VI) reduction was observed, accompanied by a removal of total chromium of up to 35% when HMW was used as the biosorbent. A comparison of the adsorption profiles of the different biosorbents highlighted the higher performance of EH, endowed with a higher surface area and characterised by a maximum adsorption capacity of about 208 mg g−1, while acetylation of the hydroxyl group led to a drop in the adsorption profile. The best fitting of the adsorption isotherm by using the Langmuir model suggests that a monolayer coverage of metal ions onto the homogeneous active sites of the lignin's surface better describes the interactions occurring at the biosorbent interface. Overall, this study demonstrates that technical lignins, and particularly EH hardwood lignin, are effective and economic materials that could be successfully employed in the Cr(VI) water remediation process.

Graphical abstract: Industrial lignins as efficient biosorbents for Cr(vi) water remediation: transforming a waste into an added value material

Supplementary files

Article information

Article type
Paper
Submitted
06 Marts 2023
Accepted
29 Jūn. 2023
First published
30 Jūn. 2023
This article is Open Access
Creative Commons BY-NC license

RSC Sustain., 2023,1, 1423-1435

Industrial lignins as efficient biosorbents for Cr(VI) water remediation: transforming a waste into an added value material

M. Vescovi, M. Melegari, C. Gazzurelli, M. Maffini, C. Mucchino, P. P. Mazzeo, M. Carcelli, J. Perego, A. Migliori, G. Leonardi, S. Pietarinen, P. Pelagatti and D. Rogolino, RSC Sustain., 2023, 1, 1423 DOI: 10.1039/D3SU00081H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements