Issue 7, 2023

Rational design of zinc powder anode with high utilization and long cycle life for advanced aqueous Zn–S batteries

Abstract

Aqueous zinc–sulfur (Zn–S) batteries are regarded as excellent candidates for energy storage applications due to their low cost, non-toxicity, and high theoretical energy density. However, the low utilization of the traditional thick foil-type Zn anode would severely restrict the overall energy density of Zn–S batteries. Herein, a mechanically and chemically stable powder-Zn/indium (pZn/In) anode with finite Zn loading was designed and constructed for enhancing the cycle stability of aqueous Zn–S batteries. Notably, the bifunctional In protective layer can inhibit the corrosion rate of highly active pZn and homogenize the Zn2+ flux during Zn plating/stripping. As a result, the obtained pZn/In anode exhibits a greatly improved cyclability of over 285 h even under a much harsh test condition (10 mA cm−2, 2.5 mA h cm−2, Zn utilization rate: ∼38.5%). Furthermore, when assembled with an S-based cathode at a negative/positive (N/P) capacity ratio ∼2, the full cell delivers a high initial specific capacity of ∼803 mA h g−1 and operates stably for over 300 cycles at 2C with a low capacity fading rate of ∼0.17% per cycle.

Graphical abstract: Rational design of zinc powder anode with high utilization and long cycle life for advanced aqueous Zn–S batteries

Supplementary files

Article information

Article type
Communication
Submitted
23 Febr. 2023
Accepted
27 Marts 2023
First published
27 Marts 2023

Mater. Horiz., 2023,10, 2436-2444

Rational design of zinc powder anode with high utilization and long cycle life for advanced aqueous Zn–S batteries

J. Li, Z. Cheng, Z. Li and Y. Huang, Mater. Horiz., 2023, 10, 2436 DOI: 10.1039/D3MH00278K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements