Issue 1, 2023

Influence of post-processing on the properties of 3D-printed poly(propylene fumarate) star polymer hydroxyapatite nanocomposites

Abstract

Vat photopolymerization is able to produce intricate parts at high print speed, good part fidelity, and strong mechanical properties. However, as materials become more complex and printing technologies advance, the post-printing processing conditions of these parts must be considered. Poly(propylene fumarate) (PPF) 4-arm stars with a of degree of polymerization (DP) of 120 were photochemically 3D printed with 5 wt% hydroxyapatite (HAp) nanoparticles (<200 nm) as a filler in a nanocomposite scaffold targeted for bone regeneration applications. Nanocomposites and pure polymers were subjected to a number of post-printing processing conditions including UV post-curing times, cure temperatures and drying times in a vacuum oven. The impact of these conditions on mechanical properties were analyzed in compression, tension, and dynamic mechanical analysis (DMA). Mechanical behavior is highly tunable with the variation of each of these different processing conditions.

Graphical abstract: Influence of post-processing on the properties of 3D-printed poly(propylene fumarate) star polymer hydroxyapatite nanocomposites

Supplementary files

Article information

Article type
Paper
Submitted
22 Apr. 2023
Accepted
19 Maijs 2023
First published
20 Jūl. 2023
This article is Open Access
Creative Commons BY-NC license

RSC Appl. Polym., 2023,1, 73-81

Influence of post-processing on the properties of 3D-printed poly(propylene fumarate) star polymer hydroxyapatite nanocomposites

T. R. Klein, A. Kirillova, K. Gall and M. L. Becker, RSC Appl. Polym., 2023, 1, 73 DOI: 10.1039/D3LP00013C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements