Issue 15, 2023

Enhanced coke-resistant Co-modified Ni/modified alumina catalyst for the bireforming of methane

Abstract

Biogas has been highlighted as a renewable energy and local source for syngas production via reforming techniques to combat global warming effects and energy sustainability. The bireforming of methane is one of the most suitable processes for utilizing biogas as it provides a syngas (H2/CO) ratio of about 2, which is suitable to couple with downstream processes such as methanol and Fischer–Tropsch synthesis for the generation of liquid hydrocarbons. Metal–support interactions, surface acidity–basicity properties, and particle sizes play a pivotal role in reforming reactions. Herein, high surface area alumina was used with dopants ceria and magnesia, aiming to tune up the surface basicity and oxygen storage properties of the support. Over this, uniformly dispersed Ni and Co nanoparticles were synthesized via the deposition precipitation method. The doping of ceria and magnesia tuned the basicity of the support and showed an improved oxygen storage capacity favoring the inhibition of coke deposition and promoting catalyst activity and stability. The Ni–Co synergy not only provides a steady and excellent activity with conversion rates of 97% and 89% for CH4 and CO2 but also inhibits coke formation during 500 h long-term activity analysis.

Graphical abstract: Enhanced coke-resistant Co-modified Ni/modified alumina catalyst for the bireforming of methane

Article information

Article type
Paper
Submitted
28 Marts 2023
Accepted
30 Maijs 2023
First published
16 Jūn. 2023

Catal. Sci. Technol., 2023,13, 4506-4516

Enhanced coke-resistant Co-modified Ni/modified alumina catalyst for the bireforming of methane

S. Panda, V. Joshi, V. K. Shrivastaw, S. Das, M. Poddar, R. Bal and A. Bordoloi, Catal. Sci. Technol., 2023, 13, 4506 DOI: 10.1039/D3CY00425B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements