Issue 22, 2022

Alloying electrode coatings towards better magnesium batteries

Abstract

Mastering the metal–electrolyte interface is mandatory for the development of reliable rechargeable magnesium batteries. Nevertheless, most of the current electrolytes contain chloride species to bypass the surface passivation of magnesium, making them corrosive to other cell components and potentially irrelevant for industrial application. Here, we demonstrate a novel approach to bypass the use of such electrolytes via the mediation of an alloy-type interface prepared by coating the surface of a magnesium electrode with liquid gallium. Chemical alloying induces the formation of a surface layer, mainly composed of intermetallic Mg2Ga5, enabling significantly improved electrochemical performance with a simple chloride-free Mg(TFSI)2/DME electrolyte. Sensibly less-polarized and more stable plating/stripping is observed with symmetric cells at a current density of 0.1 mA cm−2, and longer cycle life is achieved in full cells with positive electrodes based on sulphur and organic composites. This proof-of-concept offers room for improvement in the coating protocol and could be tuned with other liquid metals. More importantly, it opens the door to electrolytes previously considered as non-compatible with magnesium metal, and consequently paves the way for the application of metal electrodes in practical magnesium batteries.

Graphical abstract: Alloying electrode coatings towards better magnesium batteries

Supplementary files

Article information

Article type
Paper
Submitted
16 Marts 2022
Accepted
03 Maijs 2022
First published
03 Maijs 2022

J. Mater. Chem. A, 2022,10, 12104-12113

Alloying electrode coatings towards better magnesium batteries

C. Pechberty, A. Hagopian, J. Ledeuil, D. Foix, J. Allouche, J. Chotard, O. Lužanin, J. Bitenc, R. Dominko, R. Dedryvère, J. Filhol, L. Stievano and R. Berthelot, J. Mater. Chem. A, 2022, 10, 12104 DOI: 10.1039/D2TA02083A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements