Issue 22, 2022

A chemical approach for the future of PLA upcycling: from plastic wastes to new 3D printing materials

Abstract

As the demand for PLA increases, post-consumer disposal strategies must be carefully considered. While we would love to embrace a bioplastic future, we also need to tread carefully. Though PLA is widely claimed to be biodegradable, full degradation often requires conditions not typically found in landfills or industrial composting. Therefore, it will negatively impact the environment if treated carelessly. In this work, we report a simple PLA upcycling path to turn existing PLA wastes into new 3D printable materials within 48 hours. The ester bonds of PLA can be cleaved efficiently via aminolysis. The obtained monomeric compound was derivatized with methacrylic anhydride, which introduces double bonds and thus a cross-linkable monomer is obtained. In combination with a comonomer and initiator, a photocurable resin is produced. The resin can be fed into any commercially available photocuring 3D printer. The 3D printed parts derived from PLA wastes exhibit impressive performances with a tensile strength of 58.6 MPa, Young's modulus of 2.8 GPa, and glass transition at ∼180 °C. Our work demonstrates a new route to active upcycling of PLA while minimizing the need for disposal.

Graphical abstract: A chemical approach for the future of PLA upcycling: from plastic wastes to new 3D printing materials

Supplementary files

Article information

Article type
Paper
Submitted
10 Maijs 2022
Accepted
06 Jūl. 2022
First published
12 Jūl. 2022

Green Chem., 2022,24, 8716-8724

Author version available

A chemical approach for the future of PLA upcycling: from plastic wastes to new 3D printing materials

L. Shao, Y. Chang, C. Hao, M. Fei, B. Zhao, B. J. Bliss and J. Zhang, Green Chem., 2022, 24, 8716 DOI: 10.1039/D2GC01745H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements