Issue 3, 2022

CFD-accelerated bioreactor optimization: reducing the hydrodynamic parameter space

Abstract

Optimization of bioreactor design can be experimentally challenging because of the complex interactions between hydrodynamic and biological processes. A promising prototyping strategy is the use of computational fluid dynamic (CFD) simulations to identify preferred hydrodynamic parameter spaces. In this work, we describe CFD simulations of flow in anaerobic fluidized-bed reactors (FBRs), with a focus on bed expansion and particle size. The results reveal regimes of putative high mass transfer where the diffusion layer thickness is impacted by a combination of flow velocity and particle collisions. These regimes are observed when bed expansion is narrowed from 10–70% (typically recommended) to 40–60%. Similarly, prospects for short circuiting are minimized by constraining the Archimedes number Ar of fluidized particles to Ar > 1000 (as opposed to the common wisdom that “smaller is better”). When membranes are added to an FBR design, fluidized particles can effectively scour and clean membranes by constraining Ar to values Ar > 7000 (a minimum is required). We conclude that CFD can provide valuable insights into reactor design and operation, reducing the hydrodynamic parameter space that must otherwise be explored by laboratory and pilot-scale validation thus decreasing time and cost for system optimization.

Graphical abstract: CFD-accelerated bioreactor optimization: reducing the hydrodynamic parameter space

Supplementary files

Article information

Article type
Perspective
Submitted
15 Sept. 2021
Accepted
14 Janv. 2022
First published
17 Janv. 2022

Environ. Sci.: Water Res. Technol., 2022,8, 456-464

Author version available

CFD-accelerated bioreactor optimization: reducing the hydrodynamic parameter space

Y. Yao, O. B. Fringer and C. S. Criddle, Environ. Sci.: Water Res. Technol., 2022, 8, 456 DOI: 10.1039/D1EW00666E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements