Issue 2, 2022

Molecular-scale study of Cr(vi) adsorption onto lepidocrocite facets by EXAFS, in situ ATR-FTIR, theoretical frequency calculations and DFT+U techniques

Abstract

Lepidocrocite, as a ubiquitous iron mineral, is widely detected in different morphologies in natural environments, controlling the mobility and availability of heavy metal ions (HMIs). These different morphologies of lepidocrocite commonly exhibit different surface reactivities due to its exposed facets. However, the adsorption mechanism of HMIs onto lepidocrocite facets remains ambiguous. In this study, Cr(VI) adsorption on lepidocrocite with different exposed facets was investigated via macroscopic batch experiments, synchrotron-based X-ray absorption fine structure (XAFS) spectroscopy, in situ ATR-FTIR spectroscopy, and density functional theory (DFT) calculations. Macroscopic experimental results showed that the maximum Cr(VI) adsorption capacity for rod-like lepidocrocite with a higher proportion of {001}/{010} (R-LEP) was 0.137 mg m−2, 2.21 times higher than that of plate-like lepidocrocite (P-LEP). Meanwhile, the Cr(VI) site density on the {001} facet was estimated to be 4.30 #Cr nm−2, much higher than that on the {010} facets (0.42 #Cr nm−2). The fitting results of EXAFS spectroscopy revealed that Cr(VI) coordinated to the surfaces of P-LEP and R-LEP via the formation of both bidentate and monodentate inner-sphere complexes. In situ ATR-FTIR spectroscopy combined with theoretical frequency calculations showed that two Cr(VI) species formed in different relative proportions on P-LEP and R-LEP, the bidentate binuclear complex was the dominant species on the {001} facets, and the protonated monodentate binuclear configuration formed on the {010} facets. DFT+U calculations further confirmed that the two Cr(VI) surface structures on their corresponding facets both exhibited high thermodynamic stability. This study will help to understand the roles of lepidocrocite in mobilization of HMIs in environments and provide guidance to design an efficient adsorbent for environmental remediation.

Graphical abstract: Molecular-scale study of Cr(vi) adsorption onto lepidocrocite facets by EXAFS, in situ ATR-FTIR, theoretical frequency calculations and DFT+U techniques

Supplementary files

Article information

Article type
Paper
Submitted
25 Nov. 2021
Accepted
05 Janv. 2022
First published
05 Janv. 2022

Environ. Sci.: Nano, 2022,9, 568-581

Molecular-scale study of Cr(VI) adsorption onto lepidocrocite facets by EXAFS, in situ ATR-FTIR, theoretical frequency calculations and DFT+U techniques

X. Li, C. Guo, X. Jin, Q. Yao, Q. Liu, L. Zhang, G. Lu, J. R. Reinfelder, W. Huang and Z. Dang, Environ. Sci.: Nano, 2022, 9, 568 DOI: 10.1039/D1EN01085A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements