Issue 11, 2021

Carrier engineering of Zr-doped Ta3N5 film as an efficient photoanode for solar water splitting

Abstract

Ta3N5 is regarded as a promising candidate material with adequate visible light absorption and band structure for photoelectrochemical water splitting. However, the performance of Ta3N5 is severely limited by the surface recombination as well as the mismatch between the hole diffusion length and light absorption depth. We report here a facile method to prepare a high-efficiency Ta3N5 planar photoelectrode with Zr doping. When doped with Zr, the measured photocurrent density of the Ta3N5 photoanode increased from 5.4 mA cm−2 to 7.2 mA cm−2 at 1.23 VRHE with Co(OH)x catalyst decoration, while the onset potential shifted negatively by 120 mV. Through electrochemical tests and structural characterization, it was found that Zr doping increased the surface oxygen concentration and reduced the interfacial charge transport resistance. Doping was also beneficial for surface passivation and the suppression of electron–hole recombination. As a result, the photogenerated voltage of Ta3N5 increased with simultaneous Zr doping and catalyst decoration, which was conducive to the charge separation and transfer behaviour.

Graphical abstract: Carrier engineering of Zr-doped Ta3N5 film as an efficient photoanode for solar water splitting

Supplementary files

Article information

Article type
Paper
Submitted
25 Apr. 2021
Accepted
03 Maijs 2021
First published
04 Maijs 2021

Sustainable Energy Fuels, 2021,5, 2877-2883

Carrier engineering of Zr-doped Ta3N5 film as an efficient photoanode for solar water splitting

X. Zou, X. Han, C. Wang, Y. Zhao, C. Du and B. Shan, Sustainable Energy Fuels, 2021, 5, 2877 DOI: 10.1039/D1SE00640A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements