Issue 37, 2021

Vapor phase dealloying-driven synthesis of bulk nanoporous cobalt with a face-centered cubic structure

Abstract

Cobalt (Co) mainly exists in two allotropic forms: a low temperature hexagonal close-packed (HCP) structure and a high temperature face-centered cubic (FCC) structure. However, annealing at high temperature only induces the formation of FCC-Co on the surface of a bulk sample and fabrication of bulk FCC-Co is still a great challenge. In this work, nanoporous FCC-Co with a macroscopic dimension is successfully fabricated via a vapor phase alloying (VPA)–vapor phase dealloying (VPD) strategy using zinc (Zn) as the vapor source. Moreover, the thickness of the nanoporous layer could be modulated by adjusting the VPA time. The bulk nanoporous FCC-Co with different shapes and sizes can be fabricated owing to the flexibility and reactivity of the Zn vapor. Both the temperature effect and the size influence contribute to the formation of bulk FCC-Co during the VPD process. In addition, nanoporous FCC-Co shows different magnetic properties as benchmarked with pristine HCP-Co. Our findings provide a new methodology for the preparation of bulk nanoporous FCC-Co which may exhibit unique properties and potential applications.

Graphical abstract: Vapor phase dealloying-driven synthesis of bulk nanoporous cobalt with a face-centered cubic structure

Supplementary files

Article information

Article type
Paper
Submitted
05 Jūl. 2021
Accepted
07 Aug. 2021
First published
09 Aug. 2021

CrystEngComm, 2021,23, 6526-6532

Vapor phase dealloying-driven synthesis of bulk nanoporous cobalt with a face-centered cubic structure

Y. Shi, Y. Wang, W. Yang, J. Qin, Q. Bai and Z. Zhang, CrystEngComm, 2021, 23, 6526 DOI: 10.1039/D1CE00883H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements