Issue 10, 2021

Theoretical and experimental verification of imaging resolution factors in scanning electrochemical microscopy

Abstract

The imaging resolution of scanning electrochemical microscopy (SECM) depends strongly on the tip electrode size and the tip–substrate distance. Herein, etched glass encapsulation was applied to fabricate a gold disk electrode, and the size of the tip electrode was accurately determined from the steady-state limiting current. Referring to the theoretical research carried out by our predecessors, the formula for the imaging resolution was derived, followed by the imaging of gold spots and cells with the prepared microelectrodes of different sizes and with different tip–substrate distances. A depth scan was performed to generate 2D current maps of the gold spot relative to the position of the microelectrode in the xz plane. Probe approach curves and horizontal sweeps were obtained from one depth scan image by simply extracting vertical and horizontal cross-sectional lines, and further characterized by comparison with simulated curves through modeling of the experimental system. The experimental results were basically consistent with the theory, revealing that the highest imaging resolution can be obtained with the smallest tip electrode when d/a = 1, and when the size of the tip electrode is fixed the smallest tip–substrate distance can give the highest imaging resolution.

Graphical abstract: Theoretical and experimental verification of imaging resolution factors in scanning electrochemical microscopy

Supplementary files

Article information

Article type
Paper
Submitted
06 Janv. 2021
Accepted
15 Febr. 2021
First published
15 Febr. 2021

Anal. Methods, 2021,13, 1238-1246

Theoretical and experimental verification of imaging resolution factors in scanning electrochemical microscopy

Q. Xiong, T. Wu, R. Song, F. Zhang and P. He, Anal. Methods, 2021, 13, 1238 DOI: 10.1039/D1AY00025J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements