Issue 43, 2020

Methoxylation of quinoidal bithiophene as a single regioisomer building block for narrow-bandgap conjugated polymers and high-performance organic field-effect transistors

Abstract

Quinoidal bithiophene (QBT) is a highly attractive building block for high-performance polymeric semiconductors. However, it is a challenge to prepare a single regioisomer of a QBT-based building block using an indophenine reaction. Here, we introduce steric hindrance of the methoxyl group in a QBT-based system, which ensures the stereospecificity of the resulting monomers. Both methoxylated QBT (MQBT) and fluorinated MQBT (2FMQBT) monomers are copolymerized with 2,2′-bithiophene and 3,3′-difluoro-(2,2′-bithiophene) (DFBT) to form four donor–acceptor (D–A) copolymers, which display a narrow optical bandgap (<1.20 eV). Because of the introduction of fluorine atoms, P2FMQBT-DFBT displays good coplanarity and close solid-state packing, possessing the highest hole mobility of up to 2.70 cm2 V−1 s−1, which represents one of the best values for quinoidal polymers. Most importantly, the preparation of single regioisomers of MQBT and 2FMQBT is synthetically feasible for creating new QBT-based high-performance polymers.

Graphical abstract: Methoxylation of quinoidal bithiophene as a single regioisomer building block for narrow-bandgap conjugated polymers and high-performance organic field-effect transistors

Supplementary files

Article information

Article type
Paper
Submitted
06 Maijs 2020
Accepted
26 Maijs 2020
First published
26 Maijs 2020

J. Mater. Chem. C, 2020,8, 15168-15174

Methoxylation of quinoidal bithiophene as a single regioisomer building block for narrow-bandgap conjugated polymers and high-performance organic field-effect transistors

Y. Sun, Y. Zhang, Y. Ran, L. Shi, Q. Zhang, J. Chen, Q. Li, Y. Guo and Y. Liu, J. Mater. Chem. C, 2020, 8, 15168 DOI: 10.1039/D0TC02199G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements