Issue 38, 2020

Application of graphene nanowalls in an intraocular pressure sensor

Abstract

As the second leading cause of blindness in the world, glaucoma is mainly caused by persistent high intraocular pressure (IOP) that compresses the optic nerve and causes permanent damage. Noninvasive continuous monitoring of IOP is an essential method for the diagnosis and treatment of glaucoma. In this paper, we propose a new strain gauge material based on graphene nanowalls (GNWs) for continuous monitoring of IOP with high sensitivity in a wide range. By simulation, we studied the relationship between the strain of the cornea and contact lens and IOP. The structure and the location of the GNWs in the contact lens are optimized. A method for transferring GNWs on contact lenses with the assistance of a gold film is proposed. The simulated tests on porcine eyes in vitro show that the resistance response of the device to normal IOP fluctuation reaches 1.014 kΩ mmHg−1. Its normal sensitivity of 42 250 ppm mmHg−1 and the response range of 0–75 mmHg are far more than those of most noninvasive methods reported before. This study shows the enormous potential of GNWs for continuous IOP monitoring with high sensitivity and low power consumption.

Graphical abstract: Application of graphene nanowalls in an intraocular pressure sensor

Supplementary files

Article information

Article type
Paper
Submitted
08 Jūl. 2020
Accepted
10 Aug. 2020
First published
11 Aug. 2020

J. Mater. Chem. B, 2020,8, 8794-8802

Application of graphene nanowalls in an intraocular pressure sensor

Z. Liu, G. Wang, W. Pei, C. Wei, X. Wu, Z. Dou, Y. Li, Y. Wang and H. Chen, J. Mater. Chem. B, 2020, 8, 8794 DOI: 10.1039/D0TB01687J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements