Issue 6, 2020

The effect of ZnO particle lattice termination on the DC conductivity of LDPE nanocomposites

Abstract

The effects of particle surface termination by zinc or oxygen were evaluated for composites containing micro-sized ZnO particles with rod shapes (17% oxygen terminations) or ball shapes (67% oxygen terminations), and it was found that the rods gave a conductivity (1.2 × 10−16 S m−1) half that given by the ball-shaped particles (2.4 × 10−16 S m−1). Both composites containing the micro-sized particles showed a conductivity almost two orders of magnitude lower than that of the LDPE reference material (1.2 × 10−14 S m−1). When a 5 nm thick silica coating was applied to the particles, the silica encapsulation eliminated the difference between the particles and resulted in both cases in an increase in conductivity by an order of magnitude to ca. 2 × 10−15 S m−1. The conductivity was still lower than that of the pristine polyethylene polymer. It was concluded that neither the particle morphology nor the inter-particle distance (1 μm for rods and 8 μm for balls) had any effect on the conductivity of the composites for identically terminated particles, while demonstrating that the conductivity of these materials relies uniquely on the particle surface terminations. In contrast, a markedly reduced conductivity was observed for composites containing the same particles but terminated with aliphatic hydrocarbon tails, the conductivity for both rod-shaped and ball-shaped particles (1 × 10−16 S m−1) being reduced to even lower values than for the pristine particles without surface modification. The same trend was observed with the 25 nm ZnO nanoparticles, showing a record low conductivity of 1 × 10−17 S m−1 for 3 wt% nanoparticles with aliphatic hydrocarbon tails. In practical applications, this would permit higher operation voltages than currently employed HVDC cable systems by controlling the resistivity of the composite insulation for various electric fields and temperatures and making it possible to tailor the dielectric design of cable components.

Graphical abstract: The effect of ZnO particle lattice termination on the DC conductivity of LDPE nanocomposites

Supplementary files

Article information

Article type
Paper
Submitted
08 Jūn. 2020
Accepted
10 Aug. 2020
First published
11 Aug. 2020
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2020,1, 1653-1664

The effect of ZnO particle lattice termination on the DC conductivity of LDPE nanocomposites

M. E. Karlsson, A. Calamida, D. Forchheimer, H. Hillborg, V. Ström, J. M. Gardner, M. S. Hedenqvist and R. T. Olsson, Mater. Adv., 2020, 1, 1653 DOI: 10.1039/D0MA00390E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements