Issue 4, 2020

Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor

Abstract

Surface passivation of the perovskite photo absorber is a key factor to improve the photovoltaic performance. So far robust passivation strategies have not yet been revealed. Here, we demonstrate a successful passivation strategy which controls the Fermi-level of the perovskite surface by improving the surface states. Such Fermi-level control caused band-bending between the surface and bulk of the perovskite, which enhanced the hole-extraction from the absorber bulk to the HTM side. As an added benefit, the inorganic passivation layer improved the device light stability. By depositing a thick protection layer on the complete device, a remarkable waterproofing effect was obtained. As a result, an enhancement of VOC and the conversion efficiency from 20.5% to 22.1% was achieved. We revealed these passivation mechanisms and used perhydropoly(silazane) (PHPS) derived silica to control the perovskite surface states.

Graphical abstract: Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor

Supplementary files

Article information

Article type
Paper
Submitted
27 Jūn. 2019
Accepted
05 Nov. 2019
First published
06 Nov. 2019

Energy Environ. Sci., 2020,13, 1222-1230

Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor

H. Kanda, N. Shibayama, A. J. Huckaba, Y. Lee, S. Paek, N. Klipfel, C. Roldán-Carmona, V. I. E. Queloz, G. Grancini, Y. Zhang, M. Abuhelaiqa, K. T. Cho, M. Li, M. D. Mensi, S. Kinge and M. K. Nazeeruddin, Energy Environ. Sci., 2020, 13, 1222 DOI: 10.1039/C9EE02028D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements